Lexmark MS610dte Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Lexmark MS610dte Top Searches

These results are ranked by popularity.

Error
54Description: Network error
230.01...232.10Description: 230.01 Sheet covering internal duplex sensor during warm up. 230.02 Paper jam around internal duplex. 230.03 Internal duplex sensor never made by leading edge of page. 230.04 Page in duplexer ahead of current reversing page never staged. 230
321.51, 321.52, 321.53Description: 321.51 Motor 1 (Pick/Lift) motor no first encoder 321.52 Motor 1 (Pick/Lift) motor stop error 321.53 Motor 1 (Pick/Lift) PWM underflow (motor overspeed)
983.xxDescription: Invalid command received by the specified device
948.xxDescription: Failed engine card—pel clock check failed.

Lexmark MS610dte Common Errors

The most common error codes.

Error
54Description: Network error
230.01...232.10Description: 230.01 Sheet covering internal duplex sensor during warm up. 230.02 Paper jam around internal duplex. 230.03 Internal duplex sensor never made by leading edge of page. 230.04 Page in duplexer ahead of current reversing page never staged. 230
321.51, 321.52, 321.53Description: 321.51 Motor 1 (Pick/Lift) motor no first encoder 321.52 Motor 1 (Pick/Lift) motor stop error 321.53 Motor 1 (Pick/Lift) PWM underflow (motor overspeed)
983.xxDescription: Invalid command received by the specified device
948.xxDescription: Failed engine card—pel clock check failed.
54Description: Network error
230.01...232.10Description: 230.01 Sheet covering internal duplex sensor during warm up. 230.02 Paper jam around internal duplex. 230.03 Internal duplex sensor never made by leading edge of page. 230.04 Page in duplexer ahead of current reversing page never staged. 230
321.51, 321.52, 321.53Description: 321.51 Motor 1 (Pick/Lift) motor no first encoder 321.52 Motor 1 (Pick/Lift) motor stop error 321.53 Motor 1 (Pick/Lift) PWM underflow (motor overspeed)
983.xxDescription: Invalid command received by the specified device
948.xxDescription: Failed engine card—pel clock check failed.