These results are ranked by popularity.
Error | |
---|---|
980.xx | Description: Engine experiencing unreliable communication with the specified device |
121.07...121.37 | Description: 121.07 Fuser has been on for more than allowed after a gap blowout, and the temperature is still too cold. 121.08 Fuser was under temp when page was in fuser. 121.20 Fuser undertemp during steady state control. Can ocurr in printing or stand |
325.60...325.63 | Description: 325.60 Hardware error—Board ID unknown 325.61 Hardware error—Option type unknown 325.62 Hardware error—Product ID unknown 325.63 Hardware error—Sensors are not plugged on the board. |
900.xx | Description: Service RIP Software Unrecoverable RIP software error/illegal trap. |
958.xx | Description: Service NAND Failure Printer has performed more than 100 “shift and reflash” operations as a result of ECC bit corrections. |
The most common error codes.
Error | |
---|---|
980.xx | Description: Engine experiencing unreliable communication with the specified device |
121.07...121.37 | Description: 121.07 Fuser has been on for more than allowed after a gap blowout, and the temperature is still too cold. 121.08 Fuser was under temp when page was in fuser. 121.20 Fuser undertemp during steady state control. Can ocurr in printing or stand |
325.60...325.63 | Description: 325.60 Hardware error—Board ID unknown 325.61 Hardware error—Option type unknown 325.62 Hardware error—Product ID unknown 325.63 Hardware error—Sensors are not plugged on the board. |
900.xx | Description: Service RIP Software Unrecoverable RIP software error/illegal trap. |
958.xx | Description: Service NAND Failure Printer has performed more than 100 “shift and reflash” operations as a result of ECC bit corrections. |
980.xx | Description: Engine experiencing unreliable communication with the specified device |
121.07...121.37 | Description: 121.07 Fuser has been on for more than allowed after a gap blowout, and the temperature is still too cold. 121.08 Fuser was under temp when page was in fuser. 121.20 Fuser undertemp during steady state control. Can ocurr in printing or stand |
325.60...325.63 | Description: 325.60 Hardware error—Board ID unknown 325.61 Hardware error—Option type unknown 325.62 Hardware error—Product ID unknown 325.63 Hardware error—Sensors are not plugged on the board. |
900.xx | Description: Service RIP Software Unrecoverable RIP software error/illegal trap. |
958.xx | Description: Service NAND Failure Printer has performed more than 100 “shift and reflash” operations as a result of ECC bit corrections. |