Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Lexmark MS510 Top Searches

These results are ranked by popularity.

Error
242.01...244.49Description: 242.01 Paper over tray 2 pass thru sensor on warmup. 242.02 Input sensor detected late feed during a pick retry from tray 2. 242.03 Tray 2 pass thru sensor never became covered when feeding a sheet from an option below. 242.06 Failed to feed
950.xxDescription: NVRAM mismatch failure—mismatch between controller board EEPROM and control panel mirror. ".xx" codes: • 00-29— mismatch between system and mirror • 30-60—mismatch between secure and system
324.57, 324.58, 324.59.Description: 324.57 Motor 3 motor no first encoder 324.58 Motor 3 motor stop error 324.59 Motor 3 PWM underflow (motor overspeed)
111.00...111.69Description: 111.00 Pel clock check failed. 111.01 Downlevel ASIC detected. 111.31 Printhead never delivered HSYNCs. 111.32 Printhead lost HSYNCs. 111.40 Wrong printhead installed 111.50 Open-loop printhead error, open-loop sweep state. 111.51 111.52 Ope
979.xxDescription: 979.xx Service Standard Network or 979.xx Service Network Card x Flash parts failed while programming the Standard Network or Network Card x port.

Lexmark MS510 Common Errors

The most common error codes.

Error
242.01...244.49Description: 242.01 Paper over tray 2 pass thru sensor on warmup. 242.02 Input sensor detected late feed during a pick retry from tray 2. 242.03 Tray 2 pass thru sensor never became covered when feeding a sheet from an option below. 242.06 Failed to feed
950.xxDescription: NVRAM mismatch failure—mismatch between controller board EEPROM and control panel mirror. ".xx" codes: • 00-29— mismatch between system and mirror • 30-60—mismatch between secure and system
324.57, 324.58, 324.59.Description: 324.57 Motor 3 motor no first encoder 324.58 Motor 3 motor stop error 324.59 Motor 3 PWM underflow (motor overspeed)
111.00...111.69Description: 111.00 Pel clock check failed. 111.01 Downlevel ASIC detected. 111.31 Printhead never delivered HSYNCs. 111.32 Printhead lost HSYNCs. 111.40 Wrong printhead installed 111.50 Open-loop printhead error, open-loop sweep state. 111.51 111.52 Ope
979.xxDescription: 979.xx Service Standard Network or 979.xx Service Network Card x Flash parts failed while programming the Standard Network or Network Card x port.
242.01...244.49Description: 242.01 Paper over tray 2 pass thru sensor on warmup. 242.02 Input sensor detected late feed during a pick retry from tray 2. 242.03 Tray 2 pass thru sensor never became covered when feeding a sheet from an option below. 242.06 Failed to feed
950.xxDescription: NVRAM mismatch failure—mismatch between controller board EEPROM and control panel mirror. ".xx" codes: • 00-29— mismatch between system and mirror • 30-60—mismatch between secure and system
324.57, 324.58, 324.59.Description: 324.57 Motor 3 motor no first encoder 324.58 Motor 3 motor stop error 324.59 Motor 3 PWM underflow (motor overspeed)
111.00...111.69Description: 111.00 Pel clock check failed. 111.01 Downlevel ASIC detected. 111.31 Printhead never delivered HSYNCs. 111.32 Printhead lost HSYNCs. 111.40 Wrong printhead installed 111.50 Open-loop printhead error, open-loop sweep state. 111.51 111.52 Ope
979.xxDescription: 979.xx Service Standard Network or 979.xx Service Network Card x Flash parts failed while programming the Standard Network or Network Card x port.