Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Lexmark M5170 Top Searches

These results are ranked by popularity.

Error
140.10...146.00Description: 140.10 Main drive motor halls not detected 140.20 Main drive motor took too long to stop 140.30 Main drive motor unable To lock (before motor ID) 140.40 Main drive motor over speed detected 140.60 Main drive motor unable to lock (after motor
285.05Description: Media reached the sensor (ADF media exit) but is late leaving or does not clear it within the specified time.
42.xyDescription: Printer/cartridge mismatch
84Description: Imaging unit—end of life
956.xxDescription: The flatbed scanner and ADF cannot properly communicate with the controller board in the base printer

Lexmark M5170 Common Errors

The most common error codes.

Error
140.10...146.00Description: 140.10 Main drive motor halls not detected 140.20 Main drive motor took too long to stop 140.30 Main drive motor unable To lock (before motor ID) 140.40 Main drive motor over speed detected 140.60 Main drive motor unable to lock (after motor
285.05Description: Media reached the sensor (ADF media exit) but is late leaving or does not clear it within the specified time.
42.xyDescription: Printer/cartridge mismatch
84Description: Imaging unit—end of life
956.xxDescription: The flatbed scanner and ADF cannot properly communicate with the controller board in the base printer
140.10...146.00Description: 140.10 Main drive motor halls not detected 140.20 Main drive motor took too long to stop 140.30 Main drive motor unable To lock (before motor ID) 140.40 Main drive motor over speed detected 140.60 Main drive motor unable to lock (after motor
285.05Description: Media reached the sensor (ADF media exit) but is late leaving or does not clear it within the specified time.
42.xyDescription: Printer/cartridge mismatch
84Description: Imaging unit—end of life
956.xxDescription: The flatbed scanner and ADF cannot properly communicate with the controller board in the base printer