Lexmark M5150 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Lexmark M5150 Top Searches

These results are ranked by popularity.

Error
202.01Description: Media remains on the sensor (narrow media) during the warm.up sequence
843.07Description: The ADF elevator tray home position is not detected by the sensor (ADF elevator tray home position).
285.05Description: Media reached the sensor (ADF media exit) but is late leaving or does not clear it within the specified time.
133.05...133.08Description: 133.05 Toner Level Sensing reading above maximum expected value 133.06 Toner Level Sensing reading below minimum expected value 133.07 Toner failed to replenish into the Imaging Unit 133.08 Excessive toner level sensing noise
953.xxDescription: NVRAM chip failure with mirror part

Lexmark M5150 Common Errors

The most common error codes.

Error
202.01Description: Media remains on the sensor (narrow media) during the warm.up sequence
843.07Description: The ADF elevator tray home position is not detected by the sensor (ADF elevator tray home position).
285.05Description: Media reached the sensor (ADF media exit) but is late leaving or does not clear it within the specified time.
133.05...133.08Description: 133.05 Toner Level Sensing reading above maximum expected value 133.06 Toner Level Sensing reading below minimum expected value 133.07 Toner failed to replenish into the Imaging Unit 133.08 Excessive toner level sensing noise
953.xxDescription: NVRAM chip failure with mirror part
202.01Description: Media remains on the sensor (narrow media) during the warm.up sequence
843.07Description: The ADF elevator tray home position is not detected by the sensor (ADF elevator tray home position).
285.05Description: Media reached the sensor (ADF media exit) but is late leaving or does not clear it within the specified time.
133.05...133.08Description: 133.05 Toner Level Sensing reading above maximum expected value 133.06 Toner Level Sensing reading below minimum expected value 133.07 Toner failed to replenish into the Imaging Unit 133.08 Excessive toner level sensing noise
953.xxDescription: NVRAM chip failure with mirror part