These results are ranked by popularity.
Error | |
---|---|
31.46 | Description: Toner failed to replenish into the imaging unit |
940.xx | Description: RIP to engine communication failure—the zero crossing signal used for fuser control in the low voltage (LV) power supply has failed, or the wrong low voltage power supply has been installed. |
133.05...133.08 | Description: 133.05 CTLS reading above maximum expected value. 133.06 CTLS reading below minimum expected value. 133.08 Excessive CTLS noise. |
960.xx | Description: Service Memory Error RAM memory error: RAM soldered on the board is bad. |
54 | Description: Network error |
The most common error codes.
Error | |
---|---|
31.46 | Description: Toner failed to replenish into the imaging unit |
940.xx | Description: RIP to engine communication failure—the zero crossing signal used for fuser control in the low voltage (LV) power supply has failed, or the wrong low voltage power supply has been installed. |
133.05...133.08 | Description: 133.05 CTLS reading above maximum expected value. 133.06 CTLS reading below minimum expected value. 133.08 Excessive CTLS noise. |
960.xx | Description: Service Memory Error RAM memory error: RAM soldered on the board is bad. |
54 | Description: Network error |
31.46 | Description: Toner failed to replenish into the imaging unit |
940.xx | Description: RIP to engine communication failure—the zero crossing signal used for fuser control in the low voltage (LV) power supply has failed, or the wrong low voltage power supply has been installed. |
133.05...133.08 | Description: 133.05 CTLS reading above maximum expected value. 133.06 CTLS reading below minimum expected value. 133.08 Excessive CTLS noise. |
960.xx | Description: Service Memory Error RAM memory error: RAM soldered on the board is bad. |
54 | Description: Network error |