Lexmark CX860dtfe Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Lexmark CX860dtfe Top Searches

These results are ranked by popularity.

Error
282.11Description: Paper remains detected at the sensor (ADF exit) after the printer is turned on.
230.x4Description: Paper fed from the MPF cleared the sensor (duplex path 1) earlier than expected. 230.14 Paper fed from tray 1 cleared the sensor (duplex path 1) earlier than expected. 230.24 Paper fed from tray 2 cleared the sensor (duplex path 1) earlier t
172.80...172.85Description: 172.80 The LVPS fan did not turn on. 172.81 The LVPS fan did not turn off. 172.82 The LVPS fan speed did not ramp up to the required level. 172.83 The LVPS fan stalled. 172.84 The LVPS fan ran too slow. 172.85 The LVPS fan ran too fast.
663.83Description: The motor (tray 3 pick) stalled.
102.20...102.31Description: 102.20 Tray 2 product ID is invalid. 102.21 Tray 2 controller board ID is invalid. 102.22 The input option type is invalid. 102.30 Tray 3 product ID is invalid. 102.31 Tray 3 controller board ID is invalid.

Lexmark CX860dtfe Common Errors

The most common error codes.

Error
282.11Description: Paper remains detected at the sensor (ADF exit) after the printer is turned on.
230.x4Description: Paper fed from the MPF cleared the sensor (duplex path 1) earlier than expected. 230.14 Paper fed from tray 1 cleared the sensor (duplex path 1) earlier than expected. 230.24 Paper fed from tray 2 cleared the sensor (duplex path 1) earlier t
172.80...172.85Description: 172.80 The LVPS fan did not turn on. 172.81 The LVPS fan did not turn off. 172.82 The LVPS fan speed did not ramp up to the required level. 172.83 The LVPS fan stalled. 172.84 The LVPS fan ran too slow. 172.85 The LVPS fan ran too fast.
663.83Description: The motor (tray 3 pick) stalled.
102.20...102.31Description: 102.20 Tray 2 product ID is invalid. 102.21 Tray 2 controller board ID is invalid. 102.22 The input option type is invalid. 102.30 Tray 3 product ID is invalid. 102.31 Tray 3 controller board ID is invalid.
282.11Description: Paper remains detected at the sensor (ADF exit) after the printer is turned on.
230.x4Description: Paper fed from the MPF cleared the sensor (duplex path 1) earlier than expected. 230.14 Paper fed from tray 1 cleared the sensor (duplex path 1) earlier than expected. 230.24 Paper fed from tray 2 cleared the sensor (duplex path 1) earlier t
172.80...172.85Description: 172.80 The LVPS fan did not turn on. 172.81 The LVPS fan did not turn off. 172.82 The LVPS fan speed did not ramp up to the required level. 172.83 The LVPS fan stalled. 172.84 The LVPS fan ran too slow. 172.85 The LVPS fan ran too fast.
663.83Description: The motor (tray 3 pick) stalled.
102.20...102.31Description: 102.20 Tray 2 product ID is invalid. 102.21 Tray 2 controller board ID is invalid. 102.22 The input option type is invalid. 102.30 Tray 3 product ID is invalid. 102.31 Tray 3 controller board ID is invalid.