Lexmark CX825 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Lexmark CX825 Top Searches

These results are ranked by popularity.

Error
213.x2Description: 213.02 Paper fed from the MPF was detected earlier than expected at the sensor (deskew roller exit). 213.12 Paper fed from tray 1 was detected earlier than expected at the sensor (deskew roller exit). 213.22 Paper fed from tray 2 was detecte
157.80...157.85Description: 157.80 The motor (M toner add) did not turn on. 157.81 The motor (M toner add) did not turn off. 157.82 The motor (M toner add) speed did not ramp up to the required level. 157.83 The motor (M toner add) stalled. 157.84 The motor (M toner ad
58Description: The disks, trays, or bins installed are too many.
383.60...383.61Description: 383.60 The motor (staple unit carriage) did not turn on. 383.61 The motor (staple unit carriage) did not turn off.
243.x6Description: 243.46 Paper fed from tray 4 was picked but it never arrived at the sensor (tray 3 passthrough). 243.96 Paper was picked but it never arrived at the sensor (tray 3 pass-through). Paper source is undetermined.

Lexmark CX825 Common Errors

The most common error codes.

Error
213.x2Description: 213.02 Paper fed from the MPF was detected earlier than expected at the sensor (deskew roller exit). 213.12 Paper fed from tray 1 was detected earlier than expected at the sensor (deskew roller exit). 213.22 Paper fed from tray 2 was detecte
157.80...157.85Description: 157.80 The motor (M toner add) did not turn on. 157.81 The motor (M toner add) did not turn off. 157.82 The motor (M toner add) speed did not ramp up to the required level. 157.83 The motor (M toner add) stalled. 157.84 The motor (M toner ad
58Description: The disks, trays, or bins installed are too many.
383.60...383.61Description: 383.60 The motor (staple unit carriage) did not turn on. 383.61 The motor (staple unit carriage) did not turn off.
243.x6Description: 243.46 Paper fed from tray 4 was picked but it never arrived at the sensor (tray 3 passthrough). 243.96 Paper was picked but it never arrived at the sensor (tray 3 pass-through). Paper source is undetermined.
213.x2Description: 213.02 Paper fed from the MPF was detected earlier than expected at the sensor (deskew roller exit). 213.12 Paper fed from tray 1 was detected earlier than expected at the sensor (deskew roller exit). 213.22 Paper fed from tray 2 was detecte
157.80...157.85Description: 157.80 The motor (M toner add) did not turn on. 157.81 The motor (M toner add) did not turn off. 157.82 The motor (M toner add) speed did not ramp up to the required level. 157.83 The motor (M toner add) stalled. 157.84 The motor (M toner ad
58Description: The disks, trays, or bins installed are too many.
383.60...383.61Description: 383.60 The motor (staple unit carriage) did not turn on. 383.61 The motor (staple unit carriage) did not turn off.
243.x6Description: 243.46 Paper fed from tray 4 was picked but it never arrived at the sensor (tray 3 passthrough). 243.96 Paper was picked but it never arrived at the sensor (tray 3 pass-through). Paper source is undetermined.