Lexmark CX820dtfe Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Lexmark CX820dtfe Top Searches

These results are ranked by popularity.

Error
231.x3Description: 231.03 Paper fed from the MPF never arrived at the sensor (duplex path 2). 231.13 Paper fed from tray 1 never arrived at the sensor (duplex path 2). 231.23 Paper fed from tray 2 never arrived at the sensor (duplex path 2). 231.33 Paper fed f
178.80...178.85Description: 178.80 The blower fan did not turn on. 178.81 The blower fan did not turn off. 178.82 The blower fan speed did not ramp up to the required level. 178.83 The blower fan stalled. 178.84 The blower fan ran too slow. 178.85 The blower fan ran to
80Description: The printer requires maintenance. The appropriate maintenance kit needs to be installed.
121.17...121.18Description: 121.17 Fuser heater error (runaway on LV machine) was detected. 121.18 Fuser heater error (runaway on HV machine) was detected.
420.11Description: The media, with the leading edge on the upper exit area, remains detected by sensor (staple finisher transport) during warm.up sequence.

Lexmark CX820dtfe Common Errors

The most common error codes.

Error
231.x3Description: 231.03 Paper fed from the MPF never arrived at the sensor (duplex path 2). 231.13 Paper fed from tray 1 never arrived at the sensor (duplex path 2). 231.23 Paper fed from tray 2 never arrived at the sensor (duplex path 2). 231.33 Paper fed f
178.80...178.85Description: 178.80 The blower fan did not turn on. 178.81 The blower fan did not turn off. 178.82 The blower fan speed did not ramp up to the required level. 178.83 The blower fan stalled. 178.84 The blower fan ran too slow. 178.85 The blower fan ran to
80Description: The printer requires maintenance. The appropriate maintenance kit needs to be installed.
121.17...121.18Description: 121.17 Fuser heater error (runaway on LV machine) was detected. 121.18 Fuser heater error (runaway on HV machine) was detected.
420.11Description: The media, with the leading edge on the upper exit area, remains detected by sensor (staple finisher transport) during warm.up sequence.
231.x3Description: 231.03 Paper fed from the MPF never arrived at the sensor (duplex path 2). 231.13 Paper fed from tray 1 never arrived at the sensor (duplex path 2). 231.23 Paper fed from tray 2 never arrived at the sensor (duplex path 2). 231.33 Paper fed f
178.80...178.85Description: 178.80 The blower fan did not turn on. 178.81 The blower fan did not turn off. 178.82 The blower fan speed did not ramp up to the required level. 178.83 The blower fan stalled. 178.84 The blower fan ran too slow. 178.85 The blower fan ran to
80Description: The printer requires maintenance. The appropriate maintenance kit needs to be installed.
121.17...121.18Description: 121.17 Fuser heater error (runaway on LV machine) was detected. 121.18 Fuser heater error (runaway on HV machine) was detected.
420.11Description: The media, with the leading edge on the upper exit area, remains detected by sensor (staple finisher transport) during warm.up sequence.