These results are ranked by popularity.
Error | |
---|---|
282.13 | Description: Paper never arrived at the sensor (ADF exit). |
160.80...160.85 | Description: 160.80 The motor (MPF pick) did not turn on. 160.81 The motor (MPF pick) did not turn off. 160.82 The motor (MPF pick) speed did not ramp up to the required level. 160.83 The motor (MPF pick) stalled. 160.84 The motor (MPF pick) ran too slow |
202.x2 | Description: 202.02 Paper fed from the MPF was detected earlier than expected at the sensor (fuser exit). 202.12 Paper fed from tray 1 was detected earlier than expected at the sensor (fuser exit). 202.22 Paper fed from tray 2 was detected earlier than e |
420.11 | Description: The media, with the leading edge on the upper exit area, remains detected by sensor (staple finisher transport) during warm.up sequence. |
58 | Description: The disks, trays, or bins installed are too many. |
The most common error codes.
Error | |
---|---|
282.13 | Description: Paper never arrived at the sensor (ADF exit). |
160.80...160.85 | Description: 160.80 The motor (MPF pick) did not turn on. 160.81 The motor (MPF pick) did not turn off. 160.82 The motor (MPF pick) speed did not ramp up to the required level. 160.83 The motor (MPF pick) stalled. 160.84 The motor (MPF pick) ran too slow |
202.x2 | Description: 202.02 Paper fed from the MPF was detected earlier than expected at the sensor (fuser exit). 202.12 Paper fed from tray 1 was detected earlier than expected at the sensor (fuser exit). 202.22 Paper fed from tray 2 was detected earlier than e |
420.11 | Description: The media, with the leading edge on the upper exit area, remains detected by sensor (staple finisher transport) during warm.up sequence. |
58 | Description: The disks, trays, or bins installed are too many. |
282.13 | Description: Paper never arrived at the sensor (ADF exit). |
160.80...160.85 | Description: 160.80 The motor (MPF pick) did not turn on. 160.81 The motor (MPF pick) did not turn off. 160.82 The motor (MPF pick) speed did not ramp up to the required level. 160.83 The motor (MPF pick) stalled. 160.84 The motor (MPF pick) ran too slow |
202.x2 | Description: 202.02 Paper fed from the MPF was detected earlier than expected at the sensor (fuser exit). 202.12 Paper fed from tray 1 was detected earlier than expected at the sensor (fuser exit). 202.22 Paper fed from tray 2 was detected earlier than e |
420.11 | Description: The media, with the leading edge on the upper exit area, remains detected by sensor (staple finisher transport) during warm.up sequence. |
58 | Description: The disks, trays, or bins installed are too many. |