Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Lexmark CX725 Top Searches

These results are ranked by popularity.

Error
59Description: Incompatible option or tray.
964.xxDescription: Download emulation cyclic redundancy check (CRC) failure has occurred. A checksum failure detected in the emulation header or emulation file.
200.x5Description: 200.05 Paper fed from the MPF never cleared the sensor (input). 200.15 Paper fed from tray 1 never cleared the sensor (input). 200.25 Paper fed from tray 2 never cleared the sensor (input). 200.35 Paper fed from tray 3 never cleared the sens
242.x4Description: 242.24 Paper fed from tray 2 cleared the sensor (tray 2 pass-through) or the sensor (tray 2 trailing edge) earlier than expected 242.34 Paper fed from tray 3 cleared the sensor (tray 2 pass-through) or the sensor (tray 2 trailing edge) earli
110Description: 110.20 Printhead error was detected before the motor was turned on. 110.21 No printhead power when the laser servo started. 110.31 Printhead error (no first Hysnc) was detected. 110.32 Printhead error (lost first Hysnc) was detected. 110.33

Lexmark CX725 Common Errors

The most common error codes.

Error
59Description: Incompatible option or tray.
964.xxDescription: Download emulation cyclic redundancy check (CRC) failure has occurred. A checksum failure detected in the emulation header or emulation file.
200.x5Description: 200.05 Paper fed from the MPF never cleared the sensor (input). 200.15 Paper fed from tray 1 never cleared the sensor (input). 200.25 Paper fed from tray 2 never cleared the sensor (input). 200.35 Paper fed from tray 3 never cleared the sens
242.x4Description: 242.24 Paper fed from tray 2 cleared the sensor (tray 2 pass-through) or the sensor (tray 2 trailing edge) earlier than expected 242.34 Paper fed from tray 3 cleared the sensor (tray 2 pass-through) or the sensor (tray 2 trailing edge) earli
110Description: 110.20 Printhead error was detected before the motor was turned on. 110.21 No printhead power when the laser servo started. 110.31 Printhead error (no first Hysnc) was detected. 110.32 Printhead error (lost first Hysnc) was detected. 110.33
59Description: Incompatible option or tray.
964.xxDescription: Download emulation cyclic redundancy check (CRC) failure has occurred. A checksum failure detected in the emulation header or emulation file.
200.x5Description: 200.05 Paper fed from the MPF never cleared the sensor (input). 200.15 Paper fed from tray 1 never cleared the sensor (input). 200.25 Paper fed from tray 2 never cleared the sensor (input). 200.35 Paper fed from tray 3 never cleared the sens
242.x4Description: 242.24 Paper fed from tray 2 cleared the sensor (tray 2 pass-through) or the sensor (tray 2 trailing edge) earlier than expected 242.34 Paper fed from tray 3 cleared the sensor (tray 2 pass-through) or the sensor (tray 2 trailing edge) earli
110Description: 110.20 Printhead error was detected before the motor was turned on. 110.21 No printhead power when the laser servo started. 110.31 Printhead error (no first Hysnc) was detected. 110.32 Printhead error (lost first Hysnc) was detected. 110.33