Lexmark CS725de Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Lexmark CS725de Top Searches

These results are ranked by popularity.

Error
200.x5Description: 200.05 Paper fed from the MPF never cleared the sensor (input). 200.15 Paper fed from tray 1 never cleared the sensor (input). 200.25 Paper fed from tray 2 never cleared the sensor (input). 200.35 Paper fed from tray 3 never cleared the sens
900.xxDescription: Unrecoverable RIP software error/illegal trap.
34Description: Short paper.
242.26, 242.96Description: 242.26 Paper fed from tray 2 was picked but it never arrived at the sensor (tray 2 trailing edge). 242.96 Paper was picked but it never arrived at the sensor (tray 2 trailing edge). Paper source is undetermined.
110Description: 110.20 Printhead error was detected before the motor was turned on. 110.21 No printhead power when the laser servo started. 110.31 Printhead error (no first Hysnc) was detected. 110.32 Printhead error (lost first Hysnc) was detected. 110.33

Lexmark CS725de Common Errors

The most common error codes.

Error
200.x5Description: 200.05 Paper fed from the MPF never cleared the sensor (input). 200.15 Paper fed from tray 1 never cleared the sensor (input). 200.25 Paper fed from tray 2 never cleared the sensor (input). 200.35 Paper fed from tray 3 never cleared the sens
900.xxDescription: Unrecoverable RIP software error/illegal trap.
34Description: Short paper.
242.26, 242.96Description: 242.26 Paper fed from tray 2 was picked but it never arrived at the sensor (tray 2 trailing edge). 242.96 Paper was picked but it never arrived at the sensor (tray 2 trailing edge). Paper source is undetermined.
110Description: 110.20 Printhead error was detected before the motor was turned on. 110.21 No printhead power when the laser servo started. 110.31 Printhead error (no first Hysnc) was detected. 110.32 Printhead error (lost first Hysnc) was detected. 110.33
200.x5Description: 200.05 Paper fed from the MPF never cleared the sensor (input). 200.15 Paper fed from tray 1 never cleared the sensor (input). 200.25 Paper fed from tray 2 never cleared the sensor (input). 200.35 Paper fed from tray 3 never cleared the sens
900.xxDescription: Unrecoverable RIP software error/illegal trap.
34Description: Short paper.
242.26, 242.96Description: 242.26 Paper fed from tray 2 was picked but it never arrived at the sensor (tray 2 trailing edge). 242.96 Paper was picked but it never arrived at the sensor (tray 2 trailing edge). Paper source is undetermined.
110Description: 110.20 Printhead error was detected before the motor was turned on. 110.21 No printhead power when the laser servo started. 110.31 Printhead error (no first Hysnc) was detected. 110.32 Printhead error (lost first Hysnc) was detected. 110.33