Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Lexmark CS720de Top Searches

These results are ranked by popularity.

Error
100.35Description: The following sensors appear to be disconnected: 1 Sensor (MPF paper present) 2 Sensor (duplex path 2) 3 Sensor (fuser buckle) 4 Sensor (narrow media)
951.xxDescription: Error NV part on system board.
241.15Description: Paper fed from tray 1 never cleared the sensor (tray 1 pick).
244.x1Description: 244.41 Paper fed from tray 4 remains detected at the sensor (tray 4 pass.through) or at the sensor (tray 4 trailing edge) after the printer is turned on. 244.91 Paper remains detected at the sensor (tray 4 pass.through) or at the sensor (tra
978.xxDescription: Bad checksum while programming Standard Network or Network Card x port.

Lexmark CS720de Common Errors

The most common error codes.

Error
100.35Description: The following sensors appear to be disconnected: 1 Sensor (MPF paper present) 2 Sensor (duplex path 2) 3 Sensor (fuser buckle) 4 Sensor (narrow media)
951.xxDescription: Error NV part on system board.
241.15Description: Paper fed from tray 1 never cleared the sensor (tray 1 pick).
244.x1Description: 244.41 Paper fed from tray 4 remains detected at the sensor (tray 4 pass.through) or at the sensor (tray 4 trailing edge) after the printer is turned on. 244.91 Paper remains detected at the sensor (tray 4 pass.through) or at the sensor (tra
978.xxDescription: Bad checksum while programming Standard Network or Network Card x port.
100.35Description: The following sensors appear to be disconnected: 1 Sensor (MPF paper present) 2 Sensor (duplex path 2) 3 Sensor (fuser buckle) 4 Sensor (narrow media)
951.xxDescription: Error NV part on system board.
241.15Description: Paper fed from tray 1 never cleared the sensor (tray 1 pick).
244.x1Description: 244.41 Paper fed from tray 4 remains detected at the sensor (tray 4 pass.through) or at the sensor (tray 4 trailing edge) after the printer is turned on. 244.91 Paper remains detected at the sensor (tray 4 pass.through) or at the sensor (tra
978.xxDescription: Bad checksum while programming Standard Network or Network Card x port.