Lexmark CS51 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Lexmark CS51 Top Searches

These results are ranked by popularity.

Error
910.xx...919.xxDescription: 910.xx Service Engine Software A general engine software error. 911.xx Service Engine Software 912.xx Service Engine Software 913.xx Service Engine Software 914.xx Service Engine Software 915.xx Service Engine Software 916.xx Service Engine
959.xxDescription: Service Invalid Firmware Controller verification failure of system boot code. 959.0x Service System Board System hardware failure.
938.01...938.04Description: 938.01 Service Engine Hardware Board level was not obtained. 938.02 Service Engine Hardware Time out waiting for bullet serial data to be updated. 938.03 Service Engine Hardware NVM_OK was not received from NV2 server for successfully submit
960.xxDescription: Service Memory Error RAM memory error: RAM soldered on the board is bad.
110.01...110.13Description: 110.xx Service Printhead The printhead error 110.01 Service Printhead he printhead lost HSYNC 110.02 Service Printhead The printhead failed to complete servo. 110.03 Service Printhead T

Lexmark CS51 Common Errors

The most common error codes.

Error
910.xx...919.xxDescription: 910.xx Service Engine Software A general engine software error. 911.xx Service Engine Software 912.xx Service Engine Software 913.xx Service Engine Software 914.xx Service Engine Software 915.xx Service Engine Software 916.xx Service Engine
959.xxDescription: Service Invalid Firmware Controller verification failure of system boot code. 959.0x Service System Board System hardware failure.
938.01...938.04Description: 938.01 Service Engine Hardware Board level was not obtained. 938.02 Service Engine Hardware Time out waiting for bullet serial data to be updated. 938.03 Service Engine Hardware NVM_OK was not received from NV2 server for successfully submit
960.xxDescription: Service Memory Error RAM memory error: RAM soldered on the board is bad.
110.01...110.13Description: 110.xx Service Printhead The printhead error 110.01 Service Printhead he printhead lost HSYNC 110.02 Service Printhead The printhead failed to complete servo. 110.03 Service Printhead T
910.xx...919.xxDescription: 910.xx Service Engine Software A general engine software error. 911.xx Service Engine Software 912.xx Service Engine Software 913.xx Service Engine Software 914.xx Service Engine Software 915.xx Service Engine Software 916.xx Service Engine
959.xxDescription: Service Invalid Firmware Controller verification failure of system boot code. 959.0x Service System Board System hardware failure.
938.01...938.04Description: 938.01 Service Engine Hardware Board level was not obtained. 938.02 Service Engine Hardware Time out waiting for bullet serial data to be updated. 938.03 Service Engine Hardware NVM_OK was not received from NV2 server for successfully submit
960.xxDescription: Service Memory Error RAM memory error: RAM soldered on the board is bad.
110.01...110.13Description: 110.xx Service Printhead The printhead error 110.01 Service Printhead he printhead lost HSYNC 110.02 Service Printhead The printhead failed to complete servo. 110.03 Service Printhead T