Lexmark CS410 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Lexmark CS410 Top Searches

These results are ranked by popularity.

Error
958.xxDescription: Service NAND Failure Printer has performed more than 100 “shift and reflash” operations as a result of ECC bit corrections.
990.xxDescription: Service This error message indicates that an equipment check condition has occurred in the specified device. Note: can be one of the following: • Tray 2 • Tray 3
910.xx...919.xxDescription: 910.xx Service Engine Software A general engine software error. 911.xx Service Engine Software 912.xx Service Engine Software 913.xx Service Engine Software 914.xx Service Engine Software 915.xx Service Engine Software 916.xx Service Engine
959.xxDescription: Service Invalid Firmware Controller verification failure of system boot code. 959.0x Service System Board System hardware failure.
938.01...938.04Description: 938.01 Service Engine Hardware Board level was not obtained. 938.02 Service Engine Hardware Time out waiting for bullet serial data to be updated. 938.03 Service Engine Hardware NVM_OK was not received from NV2 server for successfully submit

Lexmark CS410 Common Errors

The most common error codes.

Error
958.xxDescription: Service NAND Failure Printer has performed more than 100 “shift and reflash” operations as a result of ECC bit corrections.
990.xxDescription: Service This error message indicates that an equipment check condition has occurred in the specified device. Note: can be one of the following: • Tray 2 • Tray 3
910.xx...919.xxDescription: 910.xx Service Engine Software A general engine software error. 911.xx Service Engine Software 912.xx Service Engine Software 913.xx Service Engine Software 914.xx Service Engine Software 915.xx Service Engine Software 916.xx Service Engine
959.xxDescription: Service Invalid Firmware Controller verification failure of system boot code. 959.0x Service System Board System hardware failure.
938.01...938.04Description: 938.01 Service Engine Hardware Board level was not obtained. 938.02 Service Engine Hardware Time out waiting for bullet serial data to be updated. 938.03 Service Engine Hardware NVM_OK was not received from NV2 server for successfully submit
958.xxDescription: Service NAND Failure Printer has performed more than 100 “shift and reflash” operations as a result of ECC bit corrections.
990.xxDescription: Service This error message indicates that an equipment check condition has occurred in the specified device. Note: can be one of the following: • Tray 2 • Tray 3
910.xx...919.xxDescription: 910.xx Service Engine Software A general engine software error. 911.xx Service Engine Software 912.xx Service Engine Software 913.xx Service Engine Software 914.xx Service Engine Software 915.xx Service Engine Software 916.xx Service Engine
959.xxDescription: Service Invalid Firmware Controller verification failure of system boot code. 959.0x Service System Board System hardware failure.
938.01...938.04Description: 938.01 Service Engine Hardware Board level was not obtained. 938.02 Service Engine Hardware Time out waiting for bullet serial data to be updated. 938.03 Service Engine Hardware NVM_OK was not received from NV2 server for successfully submit