These results are ranked by popularity.
| Error | |
|---|---|
| 200.42 | Description: Narrow media sensor is made early. Possible causes: • Incorrect paper settings • Defective narrow media sensor |
| 938.19 | Description: Electronics Hardware Error A waste toner full sensor not connected error occurred. |
| 83.xx | Description: Replace Transfer Module |
| 63 | Description: Unformatted disk |
| 24x.01 | Description: 242.01 Tray 2 sensor is reached during POR or after clearing the paper jam, tray 2 sensor is still triggered. Possible causes: • Obstruction on the sensor flag • Obstruction on the paper path • Paper got stuck between the sensor • Pick roll |
The most common error codes.
| Error | |
|---|---|
| 200.42 | Description: Narrow media sensor is made early. Possible causes: • Incorrect paper settings • Defective narrow media sensor |
| 938.19 | Description: Electronics Hardware Error A waste toner full sensor not connected error occurred. |
| 83.xx | Description: Replace Transfer Module |
| 63 | Description: Unformatted disk |
| 24x.01 | Description: 242.01 Tray 2 sensor is reached during POR or after clearing the paper jam, tray 2 sensor is still triggered. Possible causes: • Obstruction on the sensor flag • Obstruction on the paper path • Paper got stuck between the sensor • Pick roll |
| 200.42 | Description: Narrow media sensor is made early. Possible causes: • Incorrect paper settings • Defective narrow media sensor |
| 938.19 | Description: Electronics Hardware Error A waste toner full sensor not connected error occurred. |
| 83.xx | Description: Replace Transfer Module |
| 63 | Description: Unformatted disk |
| 24x.01 | Description: 242.01 Tray 2 sensor is reached during POR or after clearing the paper jam, tray 2 sensor is still triggered. Possible causes: • Obstruction on the sensor flag • Obstruction on the paper path • Paper got stuck between the sensor • Pick roll |
