Lexmark C792 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Lexmark C792 Top Searches

These results are ranked by popularity.

Error
203.21, 203.22Description: Paper path redrive motor stalled or is under speed. Possible causes: • Faulty paper path redrive motor • Faulty cable/connector • Faulty system board
982.00...982.12Description: Communication Error A communications error by the specified device has occurred.
200.05, 200.07Description: Input sensor does not break or breaks late. Possible causes: • Incorrect paper settings • Incorrect paper loading • Incorrect paper guide setting • ITU module failure • Lower guide failure • Paper pick mechanism failure • Input sensor failur
938.03...938.04Description: Electronics Hardware Error A communication error has occurred.
82Description: Replace Waste Toner

Lexmark C792 Common Errors

The most common error codes.

Error
203.21, 203.22Description: Paper path redrive motor stalled or is under speed. Possible causes: • Faulty paper path redrive motor • Faulty cable/connector • Faulty system board
982.00...982.12Description: Communication Error A communications error by the specified device has occurred.
200.05, 200.07Description: Input sensor does not break or breaks late. Possible causes: • Incorrect paper settings • Incorrect paper loading • Incorrect paper guide setting • ITU module failure • Lower guide failure • Paper pick mechanism failure • Input sensor failur
938.03...938.04Description: Electronics Hardware Error A communication error has occurred.
82Description: Replace Waste Toner
203.21, 203.22Description: Paper path redrive motor stalled or is under speed. Possible causes: • Faulty paper path redrive motor • Faulty cable/connector • Faulty system board
982.00...982.12Description: Communication Error A communications error by the specified device has occurred.
200.05, 200.07Description: Input sensor does not break or breaks late. Possible causes: • Incorrect paper settings • Incorrect paper loading • Incorrect paper guide setting • ITU module failure • Lower guide failure • Paper pick mechanism failure • Input sensor failur
938.03...938.04Description: Electronics Hardware Error A communication error has occurred.
82Description: Replace Waste Toner