These results are ranked by popularity.
Error | |
---|---|
200.16 | Description: S2 sensor was made excessively early. This message indicates that a paper jam has occurred at or near the printer input sensor. Open the printers left door (Paper Jam Removal Door) to access the jammed media. |
100.02 | Description: ITU Error ITU belt tracking problem |
241.xx | Description: Paper is jammed in the primary paper tray (tray 1). Remove the paper tray to access the jam. |
122.10 | Description: Fuser Error Fuser failed to warm up |
908.xx | Description: Engine Hardware Failure |
The most common error codes.
Error | |
---|---|
200.16 | Description: S2 sensor was made excessively early. This message indicates that a paper jam has occurred at or near the printer input sensor. Open the printers left door (Paper Jam Removal Door) to access the jammed media. |
100.02 | Description: ITU Error ITU belt tracking problem |
241.xx | Description: Paper is jammed in the primary paper tray (tray 1). Remove the paper tray to access the jam. |
122.10 | Description: Fuser Error Fuser failed to warm up |
908.xx | Description: Engine Hardware Failure |
200.16 | Description: S2 sensor was made excessively early. This message indicates that a paper jam has occurred at or near the printer input sensor. Open the printers left door (Paper Jam Removal Door) to access the jammed media. |
100.02 | Description: ITU Error ITU belt tracking problem |
241.xx | Description: Paper is jammed in the primary paper tray (tray 1). Remove the paper tray to access the jam. |
122.10 | Description: Fuser Error Fuser failed to warm up |
908.xx | Description: Engine Hardware Failure |