These results are ranked by popularity.
| Error | |
|---|---|
| 951.xx | Description: NVRAM Failure |
| 200.16 | Description: S2 sensor was made excessively early. This message indicates that a paper jam has occurred at or near the printer input sensor. Open the printers left door (Paper Jam Removal Door) to access the jammed media. |
| 100.02 | Description: ITU Error ITU belt tracking problem |
| 244.xx | Description: Tray 4—this paper jam message can apply to the 500-sheet Option Tray, envelope option, special media option, and HCIT option, depending on the configuration of the printer. |
| 122.10 | Description: Fuser Error Fuser failed to warm up |
The most common error codes.
| Error | |
|---|---|
| 951.xx | Description: NVRAM Failure |
| 200.16 | Description: S2 sensor was made excessively early. This message indicates that a paper jam has occurred at or near the printer input sensor. Open the printers left door (Paper Jam Removal Door) to access the jammed media. |
| 100.02 | Description: ITU Error ITU belt tracking problem |
| 244.xx | Description: Tray 4—this paper jam message can apply to the 500-sheet Option Tray, envelope option, special media option, and HCIT option, depending on the configuration of the printer. |
| 122.10 | Description: Fuser Error Fuser failed to warm up |
| 951.xx | Description: NVRAM Failure |
| 200.16 | Description: S2 sensor was made excessively early. This message indicates that a paper jam has occurred at or near the printer input sensor. Open the printers left door (Paper Jam Removal Door) to access the jammed media. |
| 100.02 | Description: ITU Error ITU belt tracking problem |
| 244.xx | Description: Tray 4—this paper jam message can apply to the 500-sheet Option Tray, envelope option, special media option, and HCIT option, depending on the configuration of the printer. |
| 122.10 | Description: Fuser Error Fuser failed to warm up |
