These results are ranked by popularity.
| Error | |
|---|---|
| 135 | Description: Fuser Error Fuser lamp on too long BUR. Error code 135 indicates that a problem exists in the fuser assembly with the backup roll bearings, backup roll thermistor, LVPS, or system board. |
| 955 | Description: Code CRC |
| 58 | Description: Too Many Bins Attached |
| 54 | Description: Std Par ENA Connection Lost |
| 202 | Description: Primary: Media has jammed at the fuser. Open the printer right door to access the jam area. Secondary: If sheets have been accumulated to be stapled when the jam is detected, the printer alternately flashes the primary and secondary messages |
The most common error codes.
| Error | |
|---|---|
| 135 | Description: Fuser Error Fuser lamp on too long BUR. Error code 135 indicates that a problem exists in the fuser assembly with the backup roll bearings, backup roll thermistor, LVPS, or system board. |
| 955 | Description: Code CRC |
| 58 | Description: Too Many Bins Attached |
| 54 | Description: Std Par ENA Connection Lost |
| 202 | Description: Primary: Media has jammed at the fuser. Open the printer right door to access the jam area. Secondary: If sheets have been accumulated to be stapled when the jam is detected, the printer alternately flashes the primary and secondary messages |
| 135 | Description: Fuser Error Fuser lamp on too long BUR. Error code 135 indicates that a problem exists in the fuser assembly with the backup roll bearings, backup roll thermistor, LVPS, or system board. |
| 955 | Description: Code CRC |
| 58 | Description: Too Many Bins Attached |
| 54 | Description: Std Par ENA Connection Lost |
| 202 | Description: Primary: Media has jammed at the fuser. Open the printer right door to access the jam area. Secondary: If sheets have been accumulated to be stapled when the jam is detected, the printer alternately flashes the primary and secondary messages |
