These results are ranked by popularity.
Error | |
---|---|
243.02 | Description: Tray 3 pass thru sensor made at POR. Possible causes: • Paper jam leaving page over the sensor • Defective pass thru sensor |
84 | Description: |
201.07 | Description: Exit sensor is made early. Possible causes: • Damaged paper exit sensor or paper exit sensor flag • Damaged fuser autoconnect • Faulty fuser DC cable connection • Faulty fuser • Faulty system board |
80 | Description: Fuser Near Life Warning |
113.01...113.02 | Description: Printhead Error An error has occurred in the yellow channel of the printhead. |
The most common error codes.
Error | |
---|---|
243.02 | Description: Tray 3 pass thru sensor made at POR. Possible causes: • Paper jam leaving page over the sensor • Defective pass thru sensor |
84 | Description: |
201.07 | Description: Exit sensor is made early. Possible causes: • Damaged paper exit sensor or paper exit sensor flag • Damaged fuser autoconnect • Faulty fuser DC cable connection • Faulty fuser • Faulty system board |
80 | Description: Fuser Near Life Warning |
113.01...113.02 | Description: Printhead Error An error has occurred in the yellow channel of the printhead. |
243.02 | Description: Tray 3 pass thru sensor made at POR. Possible causes: • Paper jam leaving page over the sensor • Defective pass thru sensor |
84 | Description: |
201.07 | Description: Exit sensor is made early. Possible causes: • Damaged paper exit sensor or paper exit sensor flag • Damaged fuser autoconnect • Faulty fuser DC cable connection • Faulty fuser • Faulty system board |
80 | Description: Fuser Near Life Warning |
113.01...113.02 | Description: Printhead Error An error has occurred in the yellow channel of the printhead. |