Lexmark C746dtn Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Lexmark C746dtn Top Searches

These results are ranked by popularity.

Error
250.05Description: While feeding from the multipurpose feeder, the input sensor is not made. Possible causes: • Incorrect media setting • Incorrect paper loading • Incorrect media restraint setting • Multipurpose feeder pick mechanism failure • System boa
920.05Description: POST Error Printhead motor not connected
242.10Description: Tray 2 page exits pass thru made early. Possible causes: • Defective pass thru sensor • Faulty cable in the connectorJOPT1 on system board.
84Description: Replace PC Unit
200.21Description: Multipurpose feeder/duplex motor assembly stalled. Possible causes: • Waste toner not seated. • Faulty cable/connector • 24 V interlock switch not working correctly • Faulty align motor • Faulty system board

Lexmark C746dtn Common Errors

The most common error codes.

Error
250.05Description: While feeding from the multipurpose feeder, the input sensor is not made. Possible causes: • Incorrect media setting • Incorrect paper loading • Incorrect media restraint setting • Multipurpose feeder pick mechanism failure • System boa
920.05Description: POST Error Printhead motor not connected
242.10Description: Tray 2 page exits pass thru made early. Possible causes: • Defective pass thru sensor • Faulty cable in the connectorJOPT1 on system board.
84Description: Replace PC Unit
200.21Description: Multipurpose feeder/duplex motor assembly stalled. Possible causes: • Waste toner not seated. • Faulty cable/connector • 24 V interlock switch not working correctly • Faulty align motor • Faulty system board
250.05Description: While feeding from the multipurpose feeder, the input sensor is not made. Possible causes: • Incorrect media setting • Incorrect paper loading • Incorrect media restraint setting • Multipurpose feeder pick mechanism failure • System boa
920.05Description: POST Error Printhead motor not connected
242.10Description: Tray 2 page exits pass thru made early. Possible causes: • Defective pass thru sensor • Faulty cable in the connectorJOPT1 on system board.
84Description: Replace PC Unit
200.21Description: Multipurpose feeder/duplex motor assembly stalled. Possible causes: • Waste toner not seated. • Faulty cable/connector • 24 V interlock switch not working correctly • Faulty align motor • Faulty system board