Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Lexmark C734 Top Searches

These results are ranked by popularity.

Error
80Description: Fuser Near Life Warning
920.01Description: POST Error Multipurpose feeder/duplex motor assembly not connected.
245.05Description: Possible causes: • Incorrect media setting • Incorrect paper loading • Incorrect media restraint setting • Tray 5 paper pick mechanism • Loading card stock from the special media tray above the fill line.
242.10Description: Tray 2 page exits pass thru made early. Possible causes: • Defective pass thru sensor • Faulty cable in the connectorJOPT1 on system board.
148.01...148.08Description: Motor Error The multipurpose feeder motor has failed.

Lexmark C734 Common Errors

The most common error codes.

Error
80Description: Fuser Near Life Warning
920.01Description: POST Error Multipurpose feeder/duplex motor assembly not connected.
245.05Description: Possible causes: • Incorrect media setting • Incorrect paper loading • Incorrect media restraint setting • Tray 5 paper pick mechanism • Loading card stock from the special media tray above the fill line.
242.10Description: Tray 2 page exits pass thru made early. Possible causes: • Defective pass thru sensor • Faulty cable in the connectorJOPT1 on system board.
148.01...148.08Description: Motor Error The multipurpose feeder motor has failed.
80Description: Fuser Near Life Warning
920.01Description: POST Error Multipurpose feeder/duplex motor assembly not connected.
245.05Description: Possible causes: • Incorrect media setting • Incorrect paper loading • Incorrect media restraint setting • Tray 5 paper pick mechanism • Loading card stock from the special media tray above the fill line.
242.10Description: Tray 2 page exits pass thru made early. Possible causes: • Defective pass thru sensor • Faulty cable in the connectorJOPT1 on system board.
148.01...148.08Description: Motor Error The multipurpose feeder motor has failed.