Error |
---|
These results are ranked by popularity.
Error | |
---|---|
2620 | Description: PF drive motor 3 error (paper feeder 3) |
7100 | Description: Toner sensor error |
0840 | Description: Faults of RTC (“Time for maintenance T” is displayed) [Check at power up] The RTC setting has reverted to a previous state. The machine has not been powered for 5 years (compared to the settings stored periodically in the EEPROM). The RTC se |
1920 | Description: Paper feeder 3 EEPROM error When writing the data, read and write data does not match 4 times in succession. |
F040 | Description: Communication error between Controller and Print engine |
The most common error codes.
Error | |
---|---|
2620 | Description: PF drive motor 3 error (paper feeder 3) |
7100 | Description: Toner sensor error |
0840 | Description: Faults of RTC (“Time for maintenance T” is displayed) [Check at power up] The RTC setting has reverted to a previous state. The machine has not been powered for 5 years (compared to the settings stored periodically in the EEPROM). The RTC se |
1920 | Description: Paper feeder 3 EEPROM error When writing the data, read and write data does not match 4 times in succession. |
F040 | Description: Communication error between Controller and Print engine |
2620 | Description: PF drive motor 3 error (paper feeder 3) |
7100 | Description: Toner sensor error |
0840 | Description: Faults of RTC (“Time for maintenance T” is displayed) [Check at power up] The RTC setting has reverted to a previous state. The machine has not been powered for 5 years (compared to the settings stored periodically in the EEPROM). The RTC se |
1920 | Description: Paper feeder 3 EEPROM error When writing the data, read and write data does not match 4 times in succession. |
F040 | Description: Communication error between Controller and Print engine |