Error |
---|
These results are ranked by popularity.
Error | |
---|---|
F25X | Description: Abnormality detecting in a network management department |
4000 | Description: Polygon motor initial error (LSU) The polygon motor ready signal is not detected when passing 10s after starting up the polygon motor |
0070 | Description: FAX PWB incompatible detection error In the initial communication with the FAX PWB, |
6400 | Description: Zero-cross signal error During the heater turned on, the zero-cross signal disappears for consecutive 1s |
0510 | Description: High voltage remote control error detection It was detected that the high voltage remote signal (synchronized with the feed motor remote) is on while the drum is not driven |
The most common error codes.
Error | |
---|---|
F25X | Description: Abnormality detecting in a network management department |
4000 | Description: Polygon motor initial error (LSU) The polygon motor ready signal is not detected when passing 10s after starting up the polygon motor |
0070 | Description: FAX PWB incompatible detection error In the initial communication with the FAX PWB, |
6400 | Description: Zero-cross signal error During the heater turned on, the zero-cross signal disappears for consecutive 1s |
0510 | Description: High voltage remote control error detection It was detected that the high voltage remote signal (synchronized with the feed motor remote) is on while the drum is not driven |
F25X | Description: Abnormality detecting in a network management department |
4000 | Description: Polygon motor initial error (LSU) The polygon motor ready signal is not detected when passing 10s after starting up the polygon motor |
0070 | Description: FAX PWB incompatible detection error In the initial communication with the FAX PWB, |
6400 | Description: Zero-cross signal error During the heater turned on, the zero-cross signal disappears for consecutive 1s |
0510 | Description: High voltage remote control error detection It was detected that the high voltage remote signal (synchronized with the feed motor remote) is on while the drum is not driven |