Kyocera KMC2525E Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Kyocera KMC2525E Top Searches

These results are ranked by popularity.

Error
C6010Description: Abnormally high fuser thermistor temperature The fuser Abnormally high signal is detected for 60 s or more.
C1100Description: Paper feeder lift motor 1 error (optional 3000-sheet paper feeder) A motor over-current signal is detected continuously for 1 s or longer.
C7913Description: Developing unit M EEPROM error Reading from or writing to EEPROM cannot be performed.
C8930Description: Backup memory data problem (optional centerfold unit of 3000-sheet document finisher) Read and write data does not match 3 times in succession.
C0240Description: Printer PWB communication problem The printer PWB does not respond 120 s after the power is turned on.

Kyocera KMC2525E Common Errors

The most common error codes.

Error
C6010Description: Abnormally high fuser thermistor temperature The fuser Abnormally high signal is detected for 60 s or more.
C1100Description: Paper feeder lift motor 1 error (optional 3000-sheet paper feeder) A motor over-current signal is detected continuously for 1 s or longer.
C7913Description: Developing unit M EEPROM error Reading from or writing to EEPROM cannot be performed.
C8930Description: Backup memory data problem (optional centerfold unit of 3000-sheet document finisher) Read and write data does not match 3 times in succession.
C0240Description: Printer PWB communication problem The printer PWB does not respond 120 s after the power is turned on.
C6010Description: Abnormally high fuser thermistor temperature The fuser Abnormally high signal is detected for 60 s or more.
C8930Description: Backup memory data problem (optional centerfold unit of 3000-sheet document finisher) Read and write data does not match 3 times in succession.
C1100Description: Paper feeder lift motor 1 error (optional 3000-sheet paper feeder) A motor over-current signal is detected continuously for 1 s or longer.
C7913Description: Developing unit M EEPROM error Reading from or writing to EEPROM cannot be performed.
C8180Description: Side registration motor 2 problem (optional 3000-sheet document finisher) When operation returned to a home position is performed at the time of initial operation and a home position is not detected even if 3 s passed. Jam 88 is indicated.