Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Kyocera KM7530 Top Searches

These results are ranked by popularity.

Error
C3300Description: Optical system (AGC) problem • After AGC, correct input is not obtained at CCD.
C6000Description: Broken fixing heater wire • The fixing temperature does not increase for 40 s after the fixing heaters have been turned on for warming up. • The fixing temperature remains below 50°C/122°F for 10 s continuously after the fixing heaters have
C0100Description: Backup memory read/write problem • Read and write data does not match.
C6400Description: Zero-crossing signal problem • The main PCB does not detect the zero-crossing signal (Z CROSS SIG) for the time specified below. At power-on: 3 s Others: 5 s
C1040Description: Lower lift motor problem • When the lower cassette is inserted, the lower lift limit switch does not turn on within 9 s of the lower lift motor turning on. • During copying, the lower lift limit switch does not turn on within 200 ms of the l

Kyocera KM7530 Common Errors

The most common error codes.

Error
C3300Description: Optical system (AGC) problem • After AGC, correct input is not obtained at CCD.
C6000Description: Broken fixing heater wire • The fixing temperature does not increase for 40 s after the fixing heaters have been turned on for warming up. • The fixing temperature remains below 50°C/122°F for 10 s continuously after the fixing heaters have
C0100Description: Backup memory read/write problem • Read and write data does not match.
C6400Description: Zero-crossing signal problem • The main PCB does not detect the zero-crossing signal (Z CROSS SIG) for the time specified below. At power-on: 3 s Others: 5 s
C1040Description: Lower lift motor problem • When the lower cassette is inserted, the lower lift limit switch does not turn on within 9 s of the lower lift motor turning on. • During copying, the lower lift limit switch does not turn on within 200 ms of the l
C3300Description: Optical system (AGC) problem • After AGC, correct input is not obtained at CCD.
C6000Description: Broken fixing heater wire • The fixing temperature does not increase for 40 s after the fixing heaters have been turned on for warming up. • The fixing temperature remains below 50°C/122°F for 10 s continuously after the fixing heaters have
C0100Description: Backup memory read/write problem • Read and write data does not match.
C6400Description: Zero-crossing signal problem • The main PCB does not detect the zero-crossing signal (Z CROSS SIG) for the time specified below. At power-on: 3 s Others: 5 s
C1040Description: Lower lift motor problem • When the lower cassette is inserted, the lower lift limit switch does not turn on within 9 s of the lower lift motor turning on. • During copying, the lower lift limit switch does not turn on within 200 ms of the l