Kyocera KM5230 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Kyocera KM5230 Top Searches

These results are ranked by popularity.

Error
C420Description: BD steady-state problem • The VTC detects a BD error for 600 ms after the polygon motor rotation has been stabilized.
C818Description: Finisher rear jogger motor problem 2 • While the rear jogger is not detected in the home position, the rear jogger home position sensor does not detect the jogger within 1.5 s of the start of rear jogger motor clockwise rotation. • After the
C032Description: Large paper deck communication problem 1 • Communication errors from the communication microcomputer (IC56) on the main PCB: No communication: there is no replay after 3 retries. Abnormal communication: a communication error (parity or check
C231Description: Desk drive motor problem 3 • DDM LOCK signal remains high for 1 s, 2 s after the desk drive motor has turned on.
C510Description: Main charger problem • MC ALM signal is detected continuously for 400 ms when MC REM signal is turned on.

Kyocera KM5230 Common Errors

The most common error codes.

Error
C420Description: BD steady-state problem • The VTC detects a BD error for 600 ms after the polygon motor rotation has been stabilized.
C818Description: Finisher rear jogger motor problem 2 • While the rear jogger is not detected in the home position, the rear jogger home position sensor does not detect the jogger within 1.5 s of the start of rear jogger motor clockwise rotation. • After the
C032Description: Large paper deck communication problem 1 • Communication errors from the communication microcomputer (IC56) on the main PCB: No communication: there is no replay after 3 retries. Abnormal communication: a communication error (parity or check
C231Description: Desk drive motor problem 3 • DDM LOCK signal remains high for 1 s, 2 s after the desk drive motor has turned on.
C510Description: Main charger problem • MC ALM signal is detected continuously for 400 ms when MC REM signal is turned on.
C420Description: BD steady-state problem • The VTC detects a BD error for 600 ms after the polygon motor rotation has been stabilized.
C818Description: Finisher rear jogger motor problem 2 • While the rear jogger is not detected in the home position, the rear jogger home position sensor does not detect the jogger within 1.5 s of the start of rear jogger motor clockwise rotation. • After the
C032Description: Large paper deck communication problem 1 • Communication errors from the communication microcomputer (IC56) on the main PCB: No communication: there is no replay after 3 retries. Abnormal communication: a communication error (parity or check
C231Description: Desk drive motor problem 3 • DDM LOCK signal remains high for 1 s, 2 s after the desk drive motor has turned on.
C510Description: Main charger problem • MC ALM signal is detected continuously for 400 ms when MC REM signal is turned on.