Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Kyocera KM5035 Top Searches

These results are ranked by popularity.

Error
C7450Description: Image formation unit fuse cut problem • The input voltage is above 4.5 V.
C0820Description: Fax control PCB CG ROM checksum error • A checksum error occurred with the CG ROM data of the fax control PCB.
C1100Description: Paper deck motor 1 problem • A motor over-current signal is detected continuously for 1 s or longer.
C8300Description: Booklet stitcher paper ejection motor problem
C5300Description: Broken cleaning lamp wire While the cleaning lamp is on, the broken cleaning lamp wire detection signal is detected for 2 s continuously.

Kyocera KM5035 Common Errors

The most common error codes.

Error
C7450Description: Image formation unit fuse cut problem • The input voltage is above 4.5 V.
C0820Description: Fax control PCB CG ROM checksum error • A checksum error occurred with the CG ROM data of the fax control PCB.
C1100Description: Paper deck motor 1 problem • A motor over-current signal is detected continuously for 1 s or longer.
C8300Description: Booklet stitcher paper ejection motor problem
C5300Description: Broken cleaning lamp wire While the cleaning lamp is on, the broken cleaning lamp wire detection signal is detected for 2 s continuously.
C7450Description: Image formation unit fuse cut problem • The input voltage is above 4.5 V.
C0820Description: Fax control PCB CG ROM checksum error • A checksum error occurred with the CG ROM data of the fax control PCB.
C1100Description: Paper deck motor 1 problem • A motor over-current signal is detected continuously for 1 s or longer.
C8300Description: Booklet stitcher paper ejection motor problem
C5300Description: Broken cleaning lamp wire While the cleaning lamp is on, the broken cleaning lamp wire detection signal is detected for 2 s continuously.