Kyocera KM4850w Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Kyocera KM4850w Top Searches

These results are ranked by popularity.

Error
C5110Description: Transfer high-voltage error Transfer short detection signal was input to CN3-3 on the engine main PCB when the transfer high-voltage REM signal was on.
C0110Description: Backup RAM error • Backup area has been altered.
C5500Description: Drum surface potential sensor error • Potential sensor input to CN2-5 on the engine main PCB was less than 500 V (3.1 V) (average of 15 inputs) during surface potential correction executed when copying starts or when the detachable unit, eje
C0210Description: MMI communication error • Initial communication between IPU PCB and engine main PCB was still not complete after 50 seconds elapsed. • Retry was conducted 20 times after data was sent but there was still no response.
C5650Description: Dark potential error Surface potential is still not within the effective range for target potential after surface potential correction is executed 10 times.

Kyocera KM4850w Common Errors

The most common error codes.

Error
C5110Description: Transfer high-voltage error Transfer short detection signal was input to CN3-3 on the engine main PCB when the transfer high-voltage REM signal was on.
C0110Description: Backup RAM error • Backup area has been altered.
C5500Description: Drum surface potential sensor error • Potential sensor input to CN2-5 on the engine main PCB was less than 500 V (3.1 V) (average of 15 inputs) during surface potential correction executed when copying starts or when the detachable unit, eje
C0210Description: MMI communication error • Initial communication between IPU PCB and engine main PCB was still not complete after 50 seconds elapsed. • Retry was conducted 20 times after data was sent but there was still no response.
C5650Description: Dark potential error Surface potential is still not within the effective range for target potential after surface potential correction is executed 10 times.
C5110Description: Transfer high-voltage error Transfer short detection signal was input to CN3-3 on the engine main PCB when the transfer high-voltage REM signal was on.
C0110Description: Backup RAM error • Backup area has been altered.
C5500Description: Drum surface potential sensor error • Potential sensor input to CN2-5 on the engine main PCB was less than 500 V (3.1 V) (average of 15 inputs) during surface potential correction executed when copying starts or when the detachable unit, eje
C0210Description: MMI communication error • Initial communication between IPU PCB and engine main PCB was still not complete after 50 seconds elapsed. • Retry was conducted 20 times after data was sent but there was still no response.
C5650Description: Dark potential error Surface potential is still not within the effective range for target potential after surface potential correction is executed 10 times.