Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Kyocera KM4530 Top Searches

These results are ranked by popularity.

Error
C2640Description: Side deck* drive motor problem • SDDM ALM signal remains high for 1 s, 1 s after the side deck drive motor has turned on.
C6050Description: Abnormally low fixing unit thermistor temperature • The fixing temperature remains below 120C/248F for 10 s.
C0040Description: Network scanner PCB* problem • Correct communication data is not obtained from network scanner PCB.
C5610Description: Drum surface potential problem 2 • Minimizing the grid output cannot set the potential.
C1010Description: Upper lift motor problem [Drawer 1] • When the drawer 1 is inserted, the lift limit switch 1 does not turn on within 5.5 s of the upper lift motor turning on. • During copying, the lift limit switch 1 does not turn on within 200 ms of the up

Kyocera KM4530 Common Errors

The most common error codes.

Error
C2640Description: Side deck* drive motor problem • SDDM ALM signal remains high for 1 s, 1 s after the side deck drive motor has turned on.
C6050Description: Abnormally low fixing unit thermistor temperature • The fixing temperature remains below 120C/248F for 10 s.
C0040Description: Network scanner PCB* problem • Correct communication data is not obtained from network scanner PCB.
C5610Description: Drum surface potential problem 2 • Minimizing the grid output cannot set the potential.
C1010Description: Upper lift motor problem [Drawer 1] • When the drawer 1 is inserted, the lift limit switch 1 does not turn on within 5.5 s of the upper lift motor turning on. • During copying, the lift limit switch 1 does not turn on within 200 ms of the up
C2640Description: Side deck* drive motor problem • SDDM ALM signal remains high for 1 s, 1 s after the side deck drive motor has turned on.
C6050Description: Abnormally low fixing unit thermistor temperature • The fixing temperature remains below 120C/248F for 10 s.
C0040Description: Network scanner PCB* problem • Correct communication data is not obtained from network scanner PCB.
C5610Description: Drum surface potential problem 2 • Minimizing the grid output cannot set the potential.
C1010Description: Upper lift motor problem [Drawer 1] • When the drawer 1 is inserted, the lift limit switch 1 does not turn on within 5.5 s of the upper lift motor turning on. • During copying, the lift limit switch 1 does not turn on within 200 ms of the up