Kyocera KM4035 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Kyocera KM4035 Top Searches

These results are ranked by popularity.

Error
C8330Description: Booklet stitcher front jog motor problem
C1110Description: Paper deck motor 2 problem • A motor over-current signal is detected continuously for 1 s or longer.
C6050Description: Abnormally low fixing unit thermistor temperature • When only fixing heater M is on, fixing thermistor 2 detects temperature lower than 80 C/176 F during copying. • When fixing heater M and fixing heater S are on, fixing thermistor 2 detects
C8500Description: Mailbox drive motor problem • While the mailbox drive motor is driving, synchronization signals do not synchronize continually for 464 ms (motor lockup).
C0280Description: Fax control PCB communication problem • There is no reply after 20 retries at communication.

Kyocera KM4035 Common Errors

The most common error codes.

Error
C8330Description: Booklet stitcher front jog motor problem
C1110Description: Paper deck motor 2 problem • A motor over-current signal is detected continuously for 1 s or longer.
C6050Description: Abnormally low fixing unit thermistor temperature • When only fixing heater M is on, fixing thermistor 2 detects temperature lower than 80 C/176 F during copying. • When fixing heater M and fixing heater S are on, fixing thermistor 2 detects
C8500Description: Mailbox drive motor problem • While the mailbox drive motor is driving, synchronization signals do not synchronize continually for 464 ms (motor lockup).
C0280Description: Fax control PCB communication problem • There is no reply after 20 retries at communication.
C8330Description: Booklet stitcher front jog motor problem
C1110Description: Paper deck motor 2 problem • A motor over-current signal is detected continuously for 1 s or longer.
C6050Description: Abnormally low fixing unit thermistor temperature • When only fixing heater M is on, fixing thermistor 2 detects temperature lower than 80 C/176 F during copying. • When fixing heater M and fixing heater S are on, fixing thermistor 2 detects
C8500Description: Mailbox drive motor problem • While the mailbox drive motor is driving, synchronization signals do not synchronize continually for 464 ms (motor lockup).
C0280Description: Fax control PCB communication problem • There is no reply after 20 retries at communication.