Kyocera KM3050 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Kyocera KM3050 Top Searches

These results are ranked by popularity.

Error
C6420Description: Fuser unit fuse cut problem The fuse cannot be cut, When replacing the fuser unit, the fuse cannot be cut in 33 s after the fuse cut signal is turned on.
C1030Description: Paper feeder lift motor 1 error (optional paper feeder) When optional cassette 3 is inserted, paper feeder lift switch 1 does not turn on within 12 s of paper feeder lift motor 1 turning on.
C8340Description: Centerfold staple motor problem (optional centerfold unit of 3000-sheet document finisher) Jam 89 is indicated.
F020Description: Memory checksum error
C0030Description: Fax control PWB system problem (optional fax) Processing with the fax software was disabled due to a hardware or software problem.

Kyocera KM3050 Common Errors

The most common error codes.

Error
C6420Description: Fuser unit fuse cut problem The fuse cannot be cut, When replacing the fuser unit, the fuse cannot be cut in 33 s after the fuse cut signal is turned on.
C1030Description: Paper feeder lift motor 1 error (optional paper feeder) When optional cassette 3 is inserted, paper feeder lift switch 1 does not turn on within 12 s of paper feeder lift motor 1 turning on.
C8340Description: Centerfold staple motor problem (optional centerfold unit of 3000-sheet document finisher) Jam 89 is indicated.
F020Description: Memory checksum error
C0030Description: Fax control PWB system problem (optional fax) Processing with the fax software was disabled due to a hardware or software problem.
C6420Description: Fuser unit fuse cut problem The fuse cannot be cut, When replacing the fuser unit, the fuse cannot be cut in 33 s after the fuse cut signal is turned on.
C1030Description: Paper feeder lift motor 1 error (optional paper feeder) When optional cassette 3 is inserted, paper feeder lift switch 1 does not turn on within 12 s of paper feeder lift motor 1 turning on.
C8340Description: Centerfold staple motor problem (optional centerfold unit of 3000-sheet document finisher) Jam 89 is indicated.
F020Description: Memory checksum error
C0030Description: Fax control PWB system problem (optional fax) Processing with the fax software was disabled due to a hardware or software problem.