Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Kyocera KM1620 Top Searches

These results are ranked by popularity.

Error
C420Description: BD steady-state problem • The MIC detects a BD error for 600ms after the polygon motor rotation has been stabilized.
C010Description: Backup memory read/write problem (main PCB) • Read and write data does not match.
C061Description: Bitmap (DIMM) problem • There is a problem with the data or address bus of the bitmap DRAM.
C600Description: Broken fixing heater wire • In fixing warm-up, the time to reach 50°C/122 °F exceeds 13.5 s, the time to reach 100°C/212 °F exceeds 10 s, the time to reach the primary stabilization exceeds 10 s or the time to reach the secondary stabilizati
C011Description: Backup memory data problem (main PCB) • Data in the specified area of the backup memory does not match the specified values.

Kyocera KM1620 Common Errors

The most common error codes.

Error
C420Description: BD steady-state problem • The MIC detects a BD error for 600ms after the polygon motor rotation has been stabilized.
C010Description: Backup memory read/write problem (main PCB) • Read and write data does not match.
C061Description: Bitmap (DIMM) problem • There is a problem with the data or address bus of the bitmap DRAM.
C600Description: Broken fixing heater wire • In fixing warm-up, the time to reach 50°C/122 °F exceeds 13.5 s, the time to reach 100°C/212 °F exceeds 10 s, the time to reach the primary stabilization exceeds 10 s or the time to reach the secondary stabilizati
C011Description: Backup memory data problem (main PCB) • Data in the specified area of the backup memory does not match the specified values.
C420Description: BD steady-state problem • The MIC detects a BD error for 600ms after the polygon motor rotation has been stabilized.
C010Description: Backup memory read/write problem (main PCB) • Read and write data does not match.
C061Description: Bitmap (DIMM) problem • There is a problem with the data or address bus of the bitmap DRAM.
C600Description: Broken fixing heater wire • In fixing warm-up, the time to reach 50°C/122 °F exceeds 13.5 s, the time to reach 100°C/212 °F exceeds 10 s, the time to reach the primary stabilization exceeds 10 s or the time to reach the secondary stabilizati
C011Description: Backup memory data problem (main PCB) • Data in the specified area of the backup memory does not match the specified values.