Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Kyocera KM1505 Top Searches

These results are ranked by popularity.

Error
C011Description: Backup memory data problem • Data in the specified area of the backup memory does not match the specified values.
C710Description: Toner sensor problem • The sensor output voltage is outside the range of 0.5 to 4.5 V during toner control. • The toner sensor control voltage cannot be set within the setting range when maintenance item U130 is run.
C100Description: Exposure lamp problem • Check the CCD input value for the lighting status of the exposure lamp 100 ms after the exposure lamp is lit and the carriage is moved to the shading position. If the exposure lamp does not light, turn off the lamp.
C730Description: Broken external temperature thermistor wire • The input voltage is above 4.5 V.
C104Description: Optical system problem • After AGC, correct input is not obtained at CCD.

Kyocera KM1505 Common Errors

The most common error codes.

Error
C011Description: Backup memory data problem • Data in the specified area of the backup memory does not match the specified values.
C710Description: Toner sensor problem • The sensor output voltage is outside the range of 0.5 to 4.5 V during toner control. • The toner sensor control voltage cannot be set within the setting range when maintenance item U130 is run.
C100Description: Exposure lamp problem • Check the CCD input value for the lighting status of the exposure lamp 100 ms after the exposure lamp is lit and the carriage is moved to the shading position. If the exposure lamp does not light, turn off the lamp.
C730Description: Broken external temperature thermistor wire • The input voltage is above 4.5 V.
C104Description: Optical system problem • After AGC, correct input is not obtained at CCD.
C011Description: Backup memory data problem • Data in the specified area of the backup memory does not match the specified values.
C710Description: Toner sensor problem • The sensor output voltage is outside the range of 0.5 to 4.5 V during toner control. • The toner sensor control voltage cannot be set within the setting range when maintenance item U130 is run.
C100Description: Exposure lamp problem • Check the CCD input value for the lighting status of the exposure lamp 100 ms after the exposure lamp is lit and the carriage is moved to the shading position. If the exposure lamp does not light, turn off the lamp.
C730Description: Broken external temperature thermistor wire • The input voltage is above 4.5 V.
C104Description: Optical system problem • After AGC, correct input is not obtained at CCD.