These results are ranked by popularity.
| Error | |
|---|---|
| C0800 | Description: Image processing problem • JAM05 is detected twice. |
| C6400 | Description: Zero-crossing signal problem • The engine board (KP-5061) does not detect the zero-crossing signal for the time specified below. At power-on: 3 s Others: 5 s |
| C0100 | Description: Backup memory read/write problem (main board (KP-5060)) • Read and write data does not match. |
| C2000 | Description: Main motor problem • LOCK ALM signal remains high for 1 s, 1 s after the main motor has turned on. |
| C7800 | Description: Broken external temperature thermistor • The input voltage is 0.5 V or less. |
The most common error codes.
| Error | |
|---|---|
| C0800 | Description: Image processing problem • JAM05 is detected twice. |
| C6400 | Description: Zero-crossing signal problem • The engine board (KP-5061) does not detect the zero-crossing signal for the time specified below. At power-on: 3 s Others: 5 s |
| C0100 | Description: Backup memory read/write problem (main board (KP-5060)) • Read and write data does not match. |
| C2000 | Description: Main motor problem • LOCK ALM signal remains high for 1 s, 1 s after the main motor has turned on. |
| C7800 | Description: Broken external temperature thermistor • The input voltage is 0.5 V or less. |
| C0800 | Description: Image processing problem • JAM05 is detected twice. |
| C6400 | Description: Zero-crossing signal problem • The engine board (KP-5061) does not detect the zero-crossing signal for the time specified below. At power-on: 3 s Others: 5 s |
| C0100 | Description: Backup memory read/write problem (main board (KP-5060)) • Read and write data does not match. |
| C2000 | Description: Main motor problem • LOCK ALM signal remains high for 1 s, 1 s after the main motor has turned on. |
| C7800 | Description: Broken external temperature thermistor • The input voltage is 0.5 V or less. |
