Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Kyocera FSC8100DN Top Searches

These results are ranked by popularity.

Error
8320Description: Centerfold paper conveying belt motor problem (optional centerfold unit of 3000-sheet document finisher) The home position is not detected when initial operation even if 2500 ms passed.
7412Description: Drum unit C type mismatch problem Absence of the drum unit C is detected.
2500Description: MP motor error After the motor drive ON signal is output and 1 s elapses, the rated speed reach signal is not input continuously for 2 s.
8030Description: Tray upper limit detection problem (optional document finisher) When the tray elevation motor raises a tray, the ON status of the tray upper limit sensor is detected.
7912Description: Developing unit C EEPROM error Reading from or writing to EEPROM cannot be performed.

Kyocera FSC8100DN Common Errors

The most common error codes.

Error
8320Description: Centerfold paper conveying belt motor problem (optional centerfold unit of 3000-sheet document finisher) The home position is not detected when initial operation even if 2500 ms passed.
7412Description: Drum unit C type mismatch problem Absence of the drum unit C is detected.
2500Description: MP motor error After the motor drive ON signal is output and 1 s elapses, the rated speed reach signal is not input continuously for 2 s.
8030Description: Tray upper limit detection problem (optional document finisher) When the tray elevation motor raises a tray, the ON status of the tray upper limit sensor is detected.
7912Description: Developing unit C EEPROM error Reading from or writing to EEPROM cannot be performed.
7412Description: Drum unit C type mismatch problem Absence of the drum unit C is detected.
8320Description: Centerfold paper conveying belt motor problem (optional centerfold unit of 3000-sheet document finisher) The home position is not detected when initial operation even if 2500 ms passed.
2500Description: MP motor error After the motor drive ON signal is output and 1 s elapses, the rated speed reach signal is not input continuously for 2 s.
F010Description: Main PWB checksum error
7912Description: Developing unit C EEPROM error Reading from or writing to EEPROM cannot be performed.