Kyocera FSC8020MFP Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Kyocera FSC8020MFP Top Searches

These results are ranked by popularity.

Error
6200Description: Broken fuser edge heater wire Fuser thermistor 1 does not reach 50° C/122 °F even after20 s during warming up. The detected temperature of fuser thermistor1 does not reach the specified temperature (ready indication temperature) for 20 s in
2310Description: Fuser motor startup error Fuser motor is not stabilized within 2 s since the motor is activated.
9500Description: BRU communication error
7420Description: Transfer belt unit type mismatch problem Absence of the transfer belt unit is detected.
4003Description: Polygon motor (M) steady-state error The rated speed signal detected the stability OFF continuously for 1 s after the polygon motor (M) stabilizes.

Kyocera FSC8020MFP Common Errors

The most common error codes.

Error
6200Description: Broken fuser edge heater wire Fuser thermistor 1 does not reach 50° C/122 °F even after20 s during warming up. The detected temperature of fuser thermistor1 does not reach the specified temperature (ready indication temperature) for 20 s in
2310Description: Fuser motor startup error Fuser motor is not stabilized within 2 s since the motor is activated.
9500Description: BRU communication error
7420Description: Transfer belt unit type mismatch problem Absence of the transfer belt unit is detected.
4003Description: Polygon motor (M) steady-state error The rated speed signal detected the stability OFF continuously for 1 s after the polygon motor (M) stabilizes.
6200Description: Broken fuser edge heater wire Fuser thermistor 1 does not reach 50° C/122 °F even after20 s during warming up. The detected temperature of fuser thermistor1 does not reach the specified temperature (ready indication temperature) for 20 s in
2310Description: Fuser motor startup error Fuser motor is not stabilized within 2 s since the motor is activated.
9500Description: BRU communication error
7420Description: Transfer belt unit type mismatch problem Absence of the transfer belt unit is detected.
4003Description: Polygon motor (M) steady-state error The rated speed signal detected the stability OFF continuously for 1 s after the polygon motor (M) stabilizes.