Kyocera FSC8008N Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Kyocera FSC8008N Top Searches

These results are ranked by popularity.

Error
F010Description: System DIMM checksum error • Checksum for the system DIMM PWB (KP-689) that holds the system program is wrong.
4200Description: Horizontal synchronized signal (PD) detection error • The horizontal synchronization signal (PD) is not entered by the laser scanner unit when ASIC (U8) on the engine controller PWB (KP-992) has issued a laser activation signal.
6140Description: Lower fuser thermistor abnormal temperature detection • The temperature detection output from the lower fuser thermistor is out of the normal range.
1020Description: Overcurrent detection of cassette base motor (Duplex unit) • Excessive current has flowed through the cassette base motor which elevates the bottom plate in the cassette when the lower cassette is installed in the PD-800 duplex unit.
2111Description: Black developer drive motor starting error • No FG (Frequency generation) pulse is entered when ASIC (U7) on the engine controller PWB (KP-992) has issued a motor activation signal to the black developer drive motor.

Kyocera FSC8008N Common Errors

The most common error codes.

Error
F010Description: System DIMM checksum error • Checksum for the system DIMM PWB (KP-689) that holds the system program is wrong.
4200Description: Horizontal synchronized signal (PD) detection error • The horizontal synchronization signal (PD) is not entered by the laser scanner unit when ASIC (U8) on the engine controller PWB (KP-992) has issued a laser activation signal.
6140Description: Lower fuser thermistor abnormal temperature detection • The temperature detection output from the lower fuser thermistor is out of the normal range.
1020Description: Overcurrent detection of cassette base motor (Duplex unit) • Excessive current has flowed through the cassette base motor which elevates the bottom plate in the cassette when the lower cassette is installed in the PD-800 duplex unit.
2111Description: Black developer drive motor starting error • No FG (Frequency generation) pulse is entered when ASIC (U7) on the engine controller PWB (KP-992) has issued a motor activation signal to the black developer drive motor.
F010Description: System DIMM checksum error • Checksum for the system DIMM PWB (KP-689) that holds the system program is wrong.
4200Description: Horizontal synchronized signal (PD) detection error • The horizontal synchronization signal (PD) is not entered by the laser scanner unit when ASIC (U8) on the engine controller PWB (KP-992) has issued a laser activation signal.
6140Description: Lower fuser thermistor abnormal temperature detection • The temperature detection output from the lower fuser thermistor is out of the normal range.
1020Description: Overcurrent detection of cassette base motor (Duplex unit) • Excessive current has flowed through the cassette base motor which elevates the bottom plate in the cassette when the lower cassette is installed in the PD-800 duplex unit.
2111Description: Black developer drive motor starting error • No FG (Frequency generation) pulse is entered when ASIC (U7) on the engine controller PWB (KP-992) has issued a motor activation signal to the black developer drive motor.