Kyocera FSC5300DN Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Kyocera FSC5300DN Top Searches

These results are ranked by popularity.

Error
6020Description: Abnormally high fuser thermistor temperature The fuser thermistor detects a temperature higher than 220°C/428°F for 10 seconds. The fuser thermistor detects a temperature higher than 240°C/464°F for 1 second.
1510, 1530, 1550Description: PF warm air heater (side blower) high temperature error* (Option paper feeder) A temperature higher than 85°C/185°F is detected. *: Multi purpose feeder only 1510: Paper feeder 1 1530: Paper feeder 2 1550: Paper feeder 3
7411Description: Drum unit K non-installing error The EEPROM of drum PWB K does not communicate normally. Incompatible drum unit K is installed.
F050Description: Engine PWB ROM checksum error
4202Description: Laser output error (Cyan) The pin photo signal (PDN) is not output from PD PWB C for one second while laser is emitted.

Kyocera FSC5300DN Common Errors

The most common error codes.

Error
6020Description: Abnormally high fuser thermistor temperature The fuser thermistor detects a temperature higher than 220°C/428°F for 10 seconds. The fuser thermistor detects a temperature higher than 240°C/464°F for 1 second.
1510, 1530, 1550Description: PF warm air heater (side blower) high temperature error* (Option paper feeder) A temperature higher than 85°C/185°F is detected. *: Multi purpose feeder only 1510: Paper feeder 1 1530: Paper feeder 2 1550: Paper feeder 3
7411Description: Drum unit K non-installing error The EEPROM of drum PWB K does not communicate normally. Incompatible drum unit K is installed.
F050Description: Engine PWB ROM checksum error
4202Description: Laser output error (Cyan) The pin photo signal (PDN) is not output from PD PWB C for one second while laser is emitted.
6020Description: Abnormally high fuser thermistor temperature The fuser thermistor detects a temperature higher than 220°C/428°F for 10 seconds. The fuser thermistor detects a temperature higher than 240°C/464°F for 1 second.
1510, 1530, 1550Description: PF warm air heater (side blower) high temperature error* (Option paper feeder) A temperature higher than 85°C/185°F is detected. *: Multi purpose feeder only 1510: Paper feeder 1 1530: Paper feeder 2 1550: Paper feeder 3
7411Description: Drum unit K non-installing error The EEPROM of drum PWB K does not communicate normally. Incompatible drum unit K is installed.
F050Description: Engine PWB ROM checksum error
4202Description: Laser output error (Cyan) The pin photo signal (PDN) is not output from PD PWB C for one second while laser is emitted.