Kyocera FSC2526MFP Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Kyocera FSC2526MFP Top Searches

These results are ranked by popularity.

Error
7411Description: Drum unit K non- installing error The EEPROM of drum PWB K does not communicate normally.
2330Description: Fuser pressure release motor error When the fuser pressure release motor is driven, the motor over-current detection signal is detected continuously for 8 times (800 ms) at 100 ms intervals.
4202Description: Laser output error (cyan) The pin photo signal is not output from PD PWB C for one second while laser is emitted.
0610Description: Expanded memory (DIMM) error The expansion memory modules (DIMM) mounted on the main PWB does not operate correctly.
6030Description: Broken fuser thermistor wire Input from fuser thermistor is 3 or less (A/D value) continuously for 1 s.

Kyocera FSC2526MFP Common Errors

The most common error codes.

Error
7411Description: Drum unit K non- installing error The EEPROM of drum PWB K does not communicate normally.
2330Description: Fuser pressure release motor error When the fuser pressure release motor is driven, the motor over-current detection signal is detected continuously for 8 times (800 ms) at 100 ms intervals.
4202Description: Laser output error (cyan) The pin photo signal is not output from PD PWB C for one second while laser is emitted.
0610Description: Expanded memory (DIMM) error The expansion memory modules (DIMM) mounted on the main PWB does not operate correctly.
6030Description: Broken fuser thermistor wire Input from fuser thermistor is 3 or less (A/D value) continuously for 1 s.
7411Description: Drum unit K non- installing error The EEPROM of drum PWB K does not communicate normally.
2330Description: Fuser pressure release motor error When the fuser pressure release motor is driven, the motor over-current detection signal is detected continuously for 8 times (800 ms) at 100 ms intervals.
4202Description: Laser output error (cyan) The pin photo signal is not output from PD PWB C for one second while laser is emitted.
0610Description: Expanded memory (DIMM) error The expansion memory modules (DIMM) mounted on the main PWB does not operate correctly.
6030Description: Broken fuser thermistor wire Input from fuser thermistor is 3 or less (A/D value) continuously for 1 s.