Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Kyocera FSC1020MFP Top Searches

These results are ranked by popularity.

Error
548Description: Low Temperature Error The center thermistor detects 100°C or less for 4 seconds.
195Description: Serial Number Error The serial number stored in the memory (EGB) is not correct.
480Description: Agitator Motor Error The agitator motor error is detected twice for 10 msec during the initialization at power-on or after the cover is closed.
557Description: Zero Cross Frequency Error The detection error occurs ten times consecutively in ten zero cross signal detections. This error is defined when the detected zero cross signal is 17 or less/27 or more for 0.2 seconds.
202Description: Polygon motor error 1: ON timeout The polygon mirror motor does not reach the targeted operating speed within 5 sec. after turning on or changing speed

Kyocera FSC1020MFP Common Errors

The most common error codes.

Error
548Description: Low Temperature Error The center thermistor detects 100°C or less for 4 seconds.
195Description: Serial Number Error The serial number stored in the memory (EGB) is not correct.
480Description: Agitator Motor Error The agitator motor error is detected twice for 10 msec during the initialization at power-on or after the cover is closed.
557Description: Zero Cross Frequency Error The detection error occurs ten times consecutively in ten zero cross signal detections. This error is defined when the detected zero cross signal is 17 or less/27 or more for 0.2 seconds.
202Description: Polygon motor error 1: ON timeout The polygon mirror motor does not reach the targeted operating speed within 5 sec. after turning on or changing speed
548Description: Low Temperature Error The center thermistor detects 100°C or less for 4 seconds.
195Description: Serial Number Error The serial number stored in the memory (EGB) is not correct.
480Description: Agitator Motor Error The agitator motor error is detected twice for 10 msec during the initialization at power-on or after the cover is closed.
557Description: Zero Cross Frequency Error The detection error occurs ten times consecutively in ten zero cross signal detections. This error is defined when the detected zero cross signal is 17 or less/27 or more for 0.2 seconds.
202Description: Polygon motor error 1: ON timeout The polygon mirror motor does not reach the targeted operating speed within 5 sec. after turning on or changing speed