These results are ranked by popularity.
| Error | |
|---|---|
| 8030 | Description: Finisher paper conveying belt problem • An on-to-off or off-to-on state change of the paper conveying belt home position sensor is not detected within 2 s of the paper conveying belt clutch turning on. |
| 8440 | Description: Booklet stitcher punch sensor problem |
| 0110 | Description: Backup memory data problem • A checksum error in backup data is detected. |
| 1130 | Description: Deck left lift of the paper feeder PF- 75 position problem • Deck level switch 1 does not turn on within 30 s of paper deck motor 1 turning on. |
| 6400 | Description: Zero-crossing signal problem • The engine controller PWB does not detect the zero-crossing signal (Z CROSS SIG) for the time specified below. At power-on: 5 s Others: 5 s |
The most common error codes.
| Error | |
|---|---|
| 8030 | Description: Finisher paper conveying belt problem • An on-to-off or off-to-on state change of the paper conveying belt home position sensor is not detected within 2 s of the paper conveying belt clutch turning on. |
| 8440 | Description: Booklet stitcher punch sensor problem |
| 0110 | Description: Backup memory data problem • A checksum error in backup data is detected. |
| 1130 | Description: Deck left lift of the paper feeder PF- 75 position problem • Deck level switch 1 does not turn on within 30 s of paper deck motor 1 turning on. |
| 6400 | Description: Zero-crossing signal problem • The engine controller PWB does not detect the zero-crossing signal (Z CROSS SIG) for the time specified below. At power-on: 5 s Others: 5 s |
| 8030 | Description: Finisher paper conveying belt problem • An on-to-off or off-to-on state change of the paper conveying belt home position sensor is not detected within 2 s of the paper conveying belt clutch turning on. |
| 8440 | Description: Booklet stitcher punch sensor problem |
| 0110 | Description: Backup memory data problem • A checksum error in backup data is detected. |
| 1130 | Description: Deck left lift of the paper feeder PF- 75 position problem • Deck level switch 1 does not turn on within 30 s of paper deck motor 1 turning on. |
| 6400 | Description: Zero-crossing signal problem • The engine controller PWB does not detect the zero-crossing signal (Z CROSS SIG) for the time specified below. At power-on: 5 s Others: 5 s |
