These results are ranked by popularity.
| Error | |
|---|---|
| F3 | Description: System Error |
| AE | Description: IT home is not detected within 0.7 sec. during rotation of main motor. |
| DE | Description: Imaging Unit type mismatch |
| F7 | Description: Option Font ROM checksum error |
| A2 | Description: Fuser temperature is over 210 °C. Fuser temperature does not reach 100 °C within 200sec,160 °C within 500sec during warming up, or it is less than 120 °C during standby, and it does not return to set temperature within 100sec after a low te |
The most common error codes.
| Error | |
|---|---|
| F3 | Description: System Error |
| AE | Description: IT home is not detected within 0.7 sec. during rotation of main motor. |
| DE | Description: Imaging Unit type mismatch |
| F7 | Description: Option Font ROM checksum error |
| A2 | Description: Fuser temperature is over 210 °C. Fuser temperature does not reach 100 °C within 200sec,160 °C within 500sec during warming up, or it is less than 120 °C during standby, and it does not return to set temperature within 100sec after a low te |
| F3 | Description: System Error |
| AE | Description: IT home is not detected within 0.7 sec. during rotation of main motor. |
| DE | Description: Imaging Unit type mismatch |
| F7 | Description: Option Font ROM checksum error |
| A2 | Description: Fuser temperature is over 210 °C. Fuser temperature does not reach 100 °C within 200sec,160 °C within 500sec during warming up, or it is less than 120 °C during standby, and it does not return to set temperature within 100sec after a low te |
