These results are ranked by popularity.
Error | |
---|---|
6020 | Description: Abnormally high fuser thermistor 2 temperature (60/50/45 ppm model only) The detection temperature of fuser thermistor 2 is higher than 235°C/455°F. In a heater-off state, the detection temperature of fuser thermistor 2 is higher than 195°C/ |
4000 | Description: Polygon motor synchronization error The polygon motor is not stabilized within 20 s after driving starts. |
0140 | Description: Backup memory data error (main PWB) |
7900 | Description: Drum unit EEPROM error No response is issued from the device in reading/writing for 5 ms or more and this problem is repeated five times successively. Mismatch of reading data from two locations occurs eight times successively. Mismatch betw |
1050 | Description: PF lift motor 4 error (paper feeder) After cassette 5 is inserted, PF lift sensor 4 does not turn on. This error is detected four times successively |
The most common error codes.
Error | |
---|---|
6020 | Description: Abnormally high fuser thermistor 2 temperature (60/50/45 ppm model only) The detection temperature of fuser thermistor 2 is higher than 235°C/455°F. In a heater-off state, the detection temperature of fuser thermistor 2 is higher than 195°C/ |
4000 | Description: Polygon motor synchronization error The polygon motor is not stabilized within 20 s after driving starts. |
0140 | Description: Backup memory data error (main PWB) |
7900 | Description: Drum unit EEPROM error No response is issued from the device in reading/writing for 5 ms or more and this problem is repeated five times successively. Mismatch of reading data from two locations occurs eight times successively. Mismatch betw |
1050 | Description: PF lift motor 4 error (paper feeder) After cassette 5 is inserted, PF lift sensor 4 does not turn on. This error is detected four times successively |
6020 | Description: Abnormally high fuser thermistor 2 temperature (60/50/45 ppm model only) The detection temperature of fuser thermistor 2 is higher than 235°C/455°F. In a heater-off state, the detection temperature of fuser thermistor 2 is higher than 195°C/ |
4000 | Description: Polygon motor synchronization error The polygon motor is not stabilized within 20 s after driving starts. |
0140 | Description: Backup memory data error (main PWB) |
7900 | Description: Drum unit EEPROM error No response is issued from the device in reading/writing for 5 ms or more and this problem is repeated five times successively. Mismatch of reading data from two locations occurs eight times successively. Mismatch betw |
1050 | Description: PF lift motor 4 error (paper feeder) After cassette 5 is inserted, PF lift sensor 4 does not turn on. This error is detected four times successively |