Kyocera FS1820 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Kyocera FS1820 Top Searches

These results are ranked by popularity.

Error
C0830Description: Flash ROM program area checksum error • A checksum error occurred with the program of the optional fax control PWB.
C6050Description: Abnormally low fusing unit thermistor temperature • The fusing temperature remains below 90C/194F for 1 s.
C0030Description: Fax control PWB system problem • Processing with the optional fax software was disabled due to a hardware or software problem.
C0870Description: Fax control PWB to main PWB highcapacity data transfer problem • High-capacity data transfer between the optional fax control PWB and the main PWB of the machine was not normally performed even if the data transfer was retried the specified
C6400Description: Zero-crossing signal problem • The engine PWB does not detect the zero-crossing signal for the time specified below. At power-on: 3 s Others: 5 s

Kyocera FS1820 Common Errors

The most common error codes.

Error
C0830Description: Flash ROM program area checksum error • A checksum error occurred with the program of the optional fax control PWB.
C6050Description: Abnormally low fusing unit thermistor temperature • The fusing temperature remains below 90C/194F for 1 s.
C0030Description: Fax control PWB system problem • Processing with the optional fax software was disabled due to a hardware or software problem.
C0870Description: Fax control PWB to main PWB highcapacity data transfer problem • High-capacity data transfer between the optional fax control PWB and the main PWB of the machine was not normally performed even if the data transfer was retried the specified
C6400Description: Zero-crossing signal problem • The engine PWB does not detect the zero-crossing signal for the time specified below. At power-on: 3 s Others: 5 s
C0830Description: Flash ROM program area checksum error • A checksum error occurred with the program of the optional fax control PWB.
C6050Description: Abnormally low fusing unit thermistor temperature • The fusing temperature remains below 90C/194F for 1 s.
C0030Description: Fax control PWB system problem • Processing with the optional fax software was disabled due to a hardware or software problem.
C0870Description: Fax control PWB to main PWB highcapacity data transfer problem • High-capacity data transfer between the optional fax control PWB and the main PWB of the machine was not normally performed even if the data transfer was retried the specified
C6400Description: Zero-crossing signal problem • The engine PWB does not detect the zero-crossing signal for the time specified below. At power-on: 3 s Others: 5 s