Kyocera FS1124MFP Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Kyocera FS1124MFP Top Searches

These results are ranked by popularity.

Error
0870Description: FAX PWB to control PWB high capacity data transfer problem High-capacity data transfer between the FAX PWB and the control PWB of the machine was not normally performed even if the data transfer was retried the specified times.
6030Description: Broken fuser thermistor wire Input from fuser thermistor is 0 (A/D value).
0030Description: FAX PWB system error Processing with the fax software was disabled due to a hardware problem.
0920Description: Fax file system error The backup data is not retained for file system abnormality of flash memory of the FAX PWB.
6400Description: Zero cross signal error The zero cross signal does not reach the control PWB for specified time.

Kyocera FS1124MFP Common Errors

The most common error codes.

Error
0870Description: FAX PWB to control PWB high capacity data transfer problem High-capacity data transfer between the FAX PWB and the control PWB of the machine was not normally performed even if the data transfer was retried the specified times.
6030Description: Broken fuser thermistor wire Input from fuser thermistor is 0 (A/D value).
0030Description: FAX PWB system error Processing with the fax software was disabled due to a hardware problem.
0920Description: Fax file system error The backup data is not retained for file system abnormality of flash memory of the FAX PWB.
6400Description: Zero cross signal error The zero cross signal does not reach the control PWB for specified time.
0870Description: FAX PWB to control PWB high capacity data transfer problem High-capacity data transfer between the FAX PWB and the control PWB of the machine was not normally performed even if the data transfer was retried the specified times.
6030Description: Broken fuser thermistor wire Input from fuser thermistor is 0 (A/D value).
0030Description: FAX PWB system error Processing with the fax software was disabled due to a hardware problem.
0920Description: Fax file system error The backup data is not retained for file system abnormality of flash memory of the FAX PWB.
6400Description: Zero cross signal error The zero cross signal does not reach the control PWB for specified time.