Kyocera TASKalfa 8000i Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Kyocera TASKalfa 8000i Top Searches

These results are ranked by popularity.

Error
1410Description: BR decurler motor error The BR decurler sensor won’t turn on or off when it was activated for 400 steps (3 times in succession).
9080Description: LED fault detection When the power supply is turned on, the peak value of LED is 80hex or less.
8160Description: DF tray motor error 3 When the main tray has descended, DF tray sensor 3 does not turn on within 20 s.
6940Description: IH fan motor error When the IH fan motor is driven, the alarm signal is detected for 5 s continuously.
4101Description: BD initialization error After polygon motor is driven, ASIC detects a BD error for 1 s.

Kyocera TASKalfa 8000i Common Errors

The most common error codes.

Error
1410Description: BR decurler motor error The BR decurler sensor won’t turn on or off when it was activated for 400 steps (3 times in succession).
9080Description: LED fault detection When the power supply is turned on, the peak value of LED is 80hex or less.
8160Description: DF tray motor error 3 When the main tray has descended, DF tray sensor 3 does not turn on within 20 s.
6940Description: IH fan motor error When the IH fan motor is driven, the alarm signal is detected for 5 s continuously.
4101Description: BD initialization error After polygon motor is driven, ASIC detects a BD error for 1 s.
1410Description: BR decurler motor error The BR decurler sensor won’t turn on or off when it was activated for 400 steps (3 times in succession).
9080Description: LED fault detection When the power supply is turned on, the peak value of LED is 80hex or less.
8160Description: DF tray motor error 3 When the main tray has descended, DF tray sensor 3 does not turn on within 20 s.
6940Description: IH fan motor error When the IH fan motor is driven, the alarm signal is detected for 5 s continuously.
4101Description: BD initialization error After polygon motor is driven, ASIC detects a BD error for 1 s.