Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Kyocera TASKalfa 6551ci Top Searches

These results are ranked by popularity.

Error
7301Description: Toner hopper motor K error During the Toner hopper motor K is driven, an event in which a locking was detected for 15 times in 200 ms intervals.
8190Description: DF side registration motor 2 error 1 When initial operation, DF side registration sensor 2 does not turn on within 3 s.
9170Description: Coin vender pay-out sensor error Coin is paid out despite the pay-out motor is determined not active.
F4DX, F4EXDescription: An error is detected at the Entity control section
4103Description: BD initialization error M After polygon motor M is driven, the BD signal is not detected for 1 s.

Kyocera TASKalfa 6551ci Common Errors

The most common error codes.

Error
7301Description: Toner hopper motor K error During the Toner hopper motor K is driven, an event in which a locking was detected for 15 times in 200 ms intervals.
8190Description: DF side registration motor 2 error 1 When initial operation, DF side registration sensor 2 does not turn on within 3 s.
9170Description: Coin vender pay-out sensor error Coin is paid out despite the pay-out motor is determined not active.
F4DX, F4EXDescription: An error is detected at the Entity control section
4103Description: BD initialization error M After polygon motor M is driven, the BD signal is not detected for 1 s.
8190Description: DF side registration motor 2 error 1 When initial operation, DF side registration sensor 2 does not turn on within 3 s.
9170Description: Coin vender pay-out sensor error Coin is paid out despite the pay-out motor is determined not active.
F4DX, F4EXDescription: An error is detected at the Entity control section
4103Description: BD initialization error M After polygon motor M is driven, the BD signal is not detected for 1 s.
6750Description: Fuser IH output over-current error The output current of IH CPU is higher than 110 A for 10 ms in succession.