Kyocera TASKalfa 6550ci Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Kyocera TASKalfa 6550ci Top Searches

These results are ranked by popularity.

Error
6730Description: Abnormally high fuser IH PWB temperature 1 The input detect temperature is greater than 105°C/221 °F.
7251Description: Short-circuited developer thermistor K The sensor input sampling is less than 69.
1250Description: SM multi feed sensor communication error (side multi tray) A communication error is detected 3 times in succession.
8120Description: DF shift motor 2 error When the DF shift motor 2 is driven, DF shift sensor 2 does not turn on within 160 ms.
2600Description: PF paper feed motor error (large capacity feeder) After PF paper feed motor is driven, the ready signal does not turn to L within 2 s.

Kyocera TASKalfa 6550ci Common Errors

The most common error codes.

Error
6730Description: Abnormally high fuser IH PWB temperature 1 The input detect temperature is greater than 105°C/221 °F.
7251Description: Short-circuited developer thermistor K The sensor input sampling is less than 69.
1250Description: SM multi feed sensor communication error (side multi tray) A communication error is detected 3 times in succession.
8120Description: DF shift motor 2 error When the DF shift motor 2 is driven, DF shift sensor 2 does not turn on within 160 ms.
2600Description: PF paper feed motor error (large capacity feeder) After PF paper feed motor is driven, the ready signal does not turn to L within 2 s.
6730Description: Abnormally high fuser IH PWB temperature 1 The input detect temperature is greater than 105°C/221 °F.
7251Description: Short-circuited developer thermistor K The sensor input sampling is less than 69.
1250Description: SM multi feed sensor communication error (side multi tray) A communication error is detected 3 times in succession.
9080Description: LED fault detection When the power supply is turned on, the peak value of LED is 80hex or less.
8120Description: DF shift motor 2 error When the DF shift motor 2 is driven, DF shift sensor 2 does not turn on within 160 ms.